Detail 01
Cut for wireless transmitter bodies
Wireless handhelds are fatter than wired mics because of the battery compartment. A wired-mic clip will not close around one.

Independent shopping perspective
Black mic clip from Shure sized for wireless handheld transmitters. For replacing a lost clip or outfitting a second stand.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Wireless handhelds are fatter than wired mics because of the battery compartment. A wired-mic clip will not close around one.
Detail 02
Grips the transmitter and threads onto a stand. Nothing else in the box.
Detail 03
Blends into dark stands under stage lighting.
Detail 04
Worth buying two. This is the piece that breaks when a stand goes over mid-set.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Check your transmitter model against the clip. Wireless bodies vary in diameter between systems, and the clip has to close fully to hold.
A wired dynamic is usually a narrower barrel, so it will sit loose. Use the clip made for that mic instead.
No. This is the clip alone.
Confirm against your stand. Mic stands use either 5/8 or 3/8 threads, and adapters are inexpensive if they do not match.
Reference
The complete catalog record, organized around the decisions musicians make when comparing gear.