Korena
Product detailSKU #1274034493512

Seymour DuncanSTK-S9 Hot Stack Plus - Bridge Pickup Black Bridge

Seymour Duncan
Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup Black Bridge

Independent shopping perspective

The Korena take

A stacked single-coil-sized humbucker for the bridge, hum-free with high output. For Strat-style players who want more push without a routing change.

Seymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup Black Bridge product detail
Product studySeymour Duncan STK-S9 Hot Stack Plus - Bridge Pickup Black Bridge

Strong match

Who this is for

  • Strat bridge slots where 60-cycle hum ruins recordings
  • Pushing an amp harder from a single-coil-sized pickup
  • Players who want more mids than a stock bridge single

Consider the trade-offs

When to look elsewhere

  • Chasing a classic thin, glassy vintage Strat bridge tone
  • Guitars with a humbucker-sized bridge route already
  • Players who want low output for pedal-driven clean sounds

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

20.26k ohms DC resistance

That figure covers both stacked coils, so it reads high; the audible output is hot but not that hot.

Detail 02

Alnico V rod magnets

Firmer and brighter than Alnico II, with stronger attack and tighter low end.

Detail 03

3.23 kHz resonant peak

The presence bump sits fairly low, so the top end is smoothed rather than spiky.

Detail 04

Stacked design

Second coil sits under the first, cancelling hum while keeping a single-coil footprint.

Detail 05

3-conductor shielded cable

Extra leads allow wiring options beyond standard; also lets a tech reverse the coil connection.

Detail 06

EQ 5/7/4

Mid-forward voicing with restrained treble — thicker than a stock single, not scooped.

Final check

Know before you order

  1. 01Pickup only — no pickguard, pots, switch or output jack included
  2. 02Higher output may unbalance your neck and middle pickups on the switch
  3. 03Requires soldering into your existing harness; shielded cable needs a proper ground

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will it fit my Strat pickguard?

It is single-coil sized for a standard bridge slot. No routing or pickguard change is needed for a conventional Strat-style bridge position.

02Is it really hum-free?

The stacked second coil cancels hum the way a humbucker does, so single-coil buzz is not part of the sound.

03Why does the resistance read over 20k?

Stacked pickups measure both coils in series, so the number is much higher than a single coil's. It is not a direct output comparison.

04Can I use it in the neck position?

It is voiced and wound as a bridge pickup. In the neck it will sound thick and loud relative to the other positions.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
H
1 detailsBody & build
Color
Bridge Pickup Black Bridge
1 detailsIn the box
Cable
3-conductor shielded
4 detailsOther
EQ Bass Middle Treble
5/7/4
Magnet
Alnico V rods
Resonant Peak
3.23 KHz
DC Resistance
20.26k ohms