Korena
Product detailSKU #1274034493492

Seymour DuncanSHPR-1s P-Rails - Neck and Bridge Pickup Set Cream

Seymour Duncan
Seymour Duncan SHPR-1s P-Rails - Neck and Bridge Pickup Set Cream

Independent shopping perspective

The Korena take

Neck and bridge set in cream that switches between P-90 and single-coil voices. For players who want several usable tones from one pickup rather than one specific sound.

Seymour Duncan SHPR-1s P-Rails - Neck and Bridge Pickup Set Cream product detail
Product studySeymour Duncan SHPR-1s P-Rails - Neck and Bridge Pickup Set Cream

Strong match

Who this is for

  • Players who want P-90 grit and cleaner single-coil tones from one guitar
  • Guitars where you want switching options via push-pull pots
  • Covering more ground without swapping pickups again

Consider the trade-offs

When to look elsewhere

  • Anyone who wants one voice and simple wiring
  • Players unwilling to install switches for the coil options
  • Guitars with only two-conductor wiring and no room for extra switching

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

4-conductor cable

Each coil is wired out separately, so you can switch between the P-90 side, the single-coil side, or both together.

Detail 02

8.56K ohms DC resistance

Moderate winding. Output sits in normal passive territory, not a high-output pickup.

Detail 03

Two Alnico V bar magnets

Alnico V gives a firm low end and clear top rather than the softer response of weaker magnet grades.

Detail 04

6.0KHz resonant peak

Peak sits in the presence range, so the pickup keeps bite and definition instead of sounding dark.

Detail 05

Neck and bridge set

Both positions covered and voiced to work together across the switch.

Detail 06

Cream covers

Cream reads warmer than white against aged hardware; check it against your pickguard before committing.

Final check

Know before you order

  1. 01Push-pull pots or extra switches are needed to access the coil options and are not included
  2. 02The 4-conductor wiring makes installation more involved than a standard two-wire swap
  3. 03Confirm your route matches; these are not standard humbucker or single-coil footprints

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can I use these without extra switches?

Yes. Wire them straight and you get one fixed voice from each pickup. The extra switching is what unlocks the other coil options from the 4-conductor cable.

02What do I need to get the switching?

Push-pull pots or mini toggles, one per pickup. They are not included, so budget for pots and a wiring session.

03Is this a full set?

Yes. Neck and bridge together, both in cream, for $249.

04How hot are these?

8.56K ohms puts them in standard passive range. They will not push an amp like a high-output humbucker, and they clean up when you back off the guitar volume.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

1 detailsPickups & controls
Pickup Configuration
P90
2 detailsBody & build
Color
Neck and Bridge Pickup Set Cream
Color Finish
White
1 detailsIn the box
Cable
4-conductor
4 detailsOther
Mode
single-coil
Magnet
two Alnico V bars
Resonant Peak
6.0KHz
DC Resistance
8.56K ohms