Detail 01
Shallow A cup
Small cup volume, so there's less air to fill. Brighter and more compact, with a thinner bottom register.
Product detailSKU #1275776904149
SchilkeStandard Series Cornet Mouthpiece Group I in Silver 6A4a Silver
Independent shopping perspective
The Korena take
Schilke 6A4a cornet mouthpiece: .630-inch cup, shallow A cup, cushion number 4 rim, 27 throat. A high-register specialist for players with a settled embouchure.
Strong match
Who this is for
- Lead cornet parts that sit high and stay there
- Long sets where rim comfort decides how far you get
- A second piece alongside a deeper everyday mouthpiece
Consider the trade-offs
When to look elsewhere
- Developing players still building tone and low register
- The round, warm cornet sound — a funnel cup does that
- Players who prefer a wide rim; .630 inch is small
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
.630 inch cup diameter
One of the smallest here. Less lip vibrates inside the cup, which helps endurance and hurts low-range flexibility.
Detail 03
Number 4 cushion rim
Wide and semi-flat, spreading mouthpiece pressure over more lip. That's what makes long high parts survivable.
Detail 04
27 throat
Tighter than the 26 throat on the standard models. More resistance to push against, which steadies notes above the staff.
Detail 05
Cornet shank
Cut for a cornet receiver. It will not seat correctly in a trumpet or flugelhorn.
Final check
Know before you order
- 01Mouthpiece only — no pouch, case or cleaning brush
- 02Cornet receiver only; it won't fit a trumpet
- 03Coming off a deeper cup, recheck tuning across the full range before a gig
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the 6A4a good for a beginner?
No. The shallow cup and small rim reward a settled embouchure. In this series the 13 is the one built for students and developing players.
02How does it compare to the 14A4a?
Same shallow A cup and number 4 semi-flat rim, but the 14A4a is .673 inch across against .630 here. The 6A4a is far smaller and more specialised.
03What do the numbers and letters mean?
The number sets cup diameter, the letter sets cup depth — A is shallow — and the number after it is rim contour. A trailing letter marks the backbore.
04Can I use this on a trumpet?
No. It's a cornet mouthpiece and the shank is sized for a cornet receiver.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Silver
32 detailsOther
- 9
- 16.33mm, .643 inch cup diameter; 26 throat. Standard characteristics allow for a full penetrating tone quality.
- 11
- 16.53mm, .653 inch cup diameter; 26 throat. A superior mouthpiece with standard characteristics for a free-blowing mouthpiece.
- 12
- 16.69mm, .657 inch cup diameter; 26 throat. A traditional medium size mouthpiece that includes a number 3 standard rim and c-backbore, which allows the player a full spectrum of sound.
- 13
- 16.89mm, .665 inch cup diameter; 26 throat. Ideal choice for a student or developing player with standard number 3 rim contour. The rounder rim provides increased flexibility and quick response. The C cup offers volume for tone.
- 14
- 17.02mm, .670 inch cup diameter; 26 throat. With a standard rim, cup and backbore, this model is an excellent choice for all-around playing.
- 13b
- 16.77mm, .660 inch cup diameter; 26 throat. This mouthpiece has a B cup that is slightly deeper than the 13A4 and also offers a narrower round rim.
- 14a4a
- 17.09mm, .673 inch cup diameter; 27 throat. A very popular mouthpiece, the 14A4a offers a shallow A cup, semi-flat number 4 rim and tight a-backbore, which allows a player a strong upper register without sacrificing tonal production.
- 11ax
- 16.51mm, .650 inch cup diameter; 27 throat. This model was developed for the Schilke piccolo trumpets. The x-backbore improves the ease of playing and opens up the sound on a piccolo trumpet.
- 6a4a
- 15.99mm, .630 inch cup diameter; 27 throat. Shallow A cup with cushion number 4 rim for extreme high register work.
- 11a
- 16.51mm, .650 inch cup diameter; 26 throat. This rim size and contour is similar to the model 11 mouthpiece, but with a shallower A cup.
- 14a4
- 17.09mm, .673 inch cup diameter; 27 throat. Same as the 14A4a, but with a standard c-backbore that offers a more open feel.
- 13a4
- 16.76mm, .660 inch cup diameter; 27 throat. Same as the 13A4a, but with a standard c-backbore which allows a free-blowing feel.
- 12a4
- 16.71mm, .658 inch cup diameter; 27 throat. This mouthpiece is the same as a 12A4a, but with a standard c-backbore.
- 13c4
- 16.89mm, .665 inch cup diameter; 26 throat. The somewhat sharp inner-edge combined with a funnel-shaped C cup offers a clear tone. The number 4 semi-flat rim adds increased endurance.
- 14c2
- 17.02mm, .670 inch cup diameter; 26 throat. This C cup and number 2 semi-rounded rim produces a rather large tone and good center.
- 10a4
- 16.43mm, .647 inch cup diameter; 27 throat. Same as the 10A4a but with a standard c-backbore, which offers less resistance.
- 11e
- 16.58mm, .653 inch cup diameter; 26 throat. The large funnel-shaped cup encourages a big round tone, ideal for cornet.
- 10a4a
- 16.43mm, .647 inch cup diameter; 27 throat. The combination of the shallow A cup, semi-flat number 4 rim and tight a-backore assists with upper register work.
- 12a4a
- 16.71mm, .658 inch cup diameter; 27 throat. Similar to the 12B4, but with a shallow A cup and tight a-backbore, which adds both endurance and range.
- 7b4
- 16.08mm, .633 inch cup diameter; 26 throat. Excellent for the player with thin lips. Number 4 rim provides good endurance with a brilliant tone.
- 11c2
- 16.51mm, .650 inch cup diameter; 26 throat. Similar to the model 11 featuring a slightly rounded number 2 rim contour.
- 14b
- 17.02mm, .670 inch cup diameter; 26 throat. Similar to the model 14, but with a B cup that is medium-small size.
- 12b4
- 16.71mm, .658 inch cup diameter; 26 throat. This medium-small conical B cup provides a full tone and the number 4 semi-flat rim allows for more endurance.
- 8e2
- 16.15mm, .636 inch cup diameter; 26 throat. The deep funnel-shaped cup provides a smooth tone and is very flexible in all registers. Recommended for cornet players
- 13d4
- 16.89mm, .665 inch cup diameter; 27 throat. Best option for a player looking for a thick, rich, weighted sound. Medium-large D cup offers a tone that is colorful with depth. The number 4 semi-flat rim affords comfort with a sharper bite for superior articulation clarity. The cup diameter is ideal for all players from student to professional.
- 10b4
- 16.43mm, .643 inch cup diameter; 26 throat. A medium-small funnel-shaped B cup offers both a quality sound and support in the register.
- 13a4a
- 16.76mm, .660 inch cup diameter; 27 throat. The shallow A cup, semi-flat number 4 rim and tight a-backbore creates an ideal lead mouthpiece.
- 11d4
- 16.58mm, .653 inch cup diameter; 26 throat. Slightly deeper than the model 11 with a number 4 semi-flat rim, which provides a definite cushion feel for endurance.
- 5a4
- 15.84mm, .624 inch cup diameter; 26 throat. Small cup diameter which aids upper register. Popular for use as a piccolo trumpet mouthpiece.
- 14a4x
- 17.09mm, .673 inch cup diameter; 27 throat. Based on the popular 14A4a, this mouthpiece creates a very open blowing feel with the large x-backbore. This backbore improves the ease of playing and opens up the sound of a piccolo trumpet.
- 9c4
- 16.36mm, .644 in cup diameter; 26 throat. Like the 9 mouthpiece, however the 4 semi-flat rim provides excellent endurance.
- 8a4
- 16.25mm, .640 inch cup diameter; 26 throat. The slightly funnel-shape cup at the entrance to the throat provides a good tone and the number 4 semi-flat rim gives superior endurance.
