Detail 01
10 inch pad size
A larger target than 8-inch pads, closer to a real tom's playing area, with more room off center.
Product detailSKU #1329494009915
RolandPDX-100 V-Pad 10"
1/2
Independent shopping perspective
The Korena take
A 10-inch Roland V-Pad for electronic kits, sized as a tom or snare position on a rack or standard drum hardware.
Strong match
Who this is for
- Expanding a Roland V-Drums kit with an extra tom position
- Replacing an undersized stock pad with a 10-inch playing surface
- Adding a pad to a rack or stand you already own
Consider the trade-offs
When to look elsewhere
- Anyone needing a module; this is a pad only
- Players wanting an acoustic drum sound without an electronic kit
- Mounts with pipe or rod sizes outside the listed range
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
7/8 inch usable pipe size
Matches common Roland rack and stand tubing. Check your rack's pipe diameter before assuming it clamps on.
Detail 03
3/8 to 9/16 inch rod diameters
The mount accepts a range of L-rod thicknesses, so it fits several hardware brands, not just one.
Detail 04
4 pound weight
Light enough that a single rack arm holds it without sag, unlike heavier full-shell pads.
Detail 05
12-1/4 x 12-13/16 inch outer size
Plan roughly 13 inches of rack space per pad when laying out a crowded kit.
Final check
Know before you order
- 01Pad only. No module, cable, mount, or rack arm is included
- 02Confirm your rack pipe is 7/8 inch and rods fall between 3/8 and 9/16 inch
- 03Your module needs a free trigger input, or a splitter, for this pad
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this include a mount or clamp?
No. The pad accepts 7/8-inch pipe and 3/8 to 9/16-inch rods, but you supply the rack arm or stand.
02Can I use it as a snare instead of a tom?
Yes. The 10-inch surface works in either position; it comes down to where you mount it and how you assign the trigger input in your module.
03Will it work with my drum module?
It needs a module with an available trigger input. Assign it as a tom or snare in your module's settings.
04How much space does it take on a rack?
About 12-1/4 by 12-13/16 inches overall, so allow roughly 13 inches of clearance per pad.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsSize & weight
- Depth
- 12-13/16 inch
- Width
- 12-1/4 inch
- Weight
- 4
- Acceptable Rod Diameters
- 3/8 inch to 9/16 inch
- Height
- 3-9/16 inch
1 detailsOther
- Usable Pipe Size
- 7/8 inch
