Detail 01
Two headphone amplifiers, each with independent digital level control
Two musicians can monitor independently from the interface.
Product detailSKU #1500000323250
RMEBabyface Pro FS Audio Interface
1/8
Independent shopping perspective
The Korena take
RME’s Babyface Pro FS is a portable USB audio interface designed for serious tracking, monitoring, and routing work. Two separately level-controlled headphone amplifiers let two musicians monitor independently, while TotalMix FX supplies virtual mixing, flexible routing, submixing, and channel processing. SteadyClock FS is specified for ultra-low jitter and clock stability, and round-trip latency can be as low as 5 ms for virtual-instrument monitoring or vocal tracking. Its 108 x 35 x 181 mm chassis weighs 680 g.
Strong match
Who this is for
- Tracking vocalists while monitoring at round-trip latency as low as 5 ms.
- Giving two musicians independent headphone monitoring levels during a recording session.
- Building separate monitoring mixes with TotalMix FX routing and stereo submixes.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Up to six independent stereo submixes
TotalMix FX can create multiple separate stereo monitoring mixes.
Detail 03
USB bus power or external power supply
The interface supports either listed power method.
Detail 04
108 x 35 x 181 mm; 680 g
Its stated size and weight suit a portable interface format.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can two people monitor independently?
Yes. The two high-power headphone amplifiers each have their own digitally controlled level control.
02What does TotalMix FX provide?
It provides a virtual mixer with routing, submixing, monitoring, 3-band EQ, reverb, and delay.
03What powers the Babyface Pro FS?
It can run from USB bus power or an external power supply.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
5 detailsSound
- Frequency Response 44 1 KHZ 0 1 DB
- 5 Hz – 20.8 kHz
- Frequency Response 44 1 KHZ 0 5 DB
- 0 Hz – 20.8 kHz
- Effective Clock Jitter Influence On Ad and Da Conversion
- near zero
- Frequency Response 96 KHZ 0 5 DB
- 0 Hz – 45 kHz
- Frequency Response 192 KHZ 1 DB
- 0 Hz - 89 kHz
20 detailsConnections & power
- Current At 12 V External Power
- 313 mA (3.7 Watts)
- Output
- 3.5 mm TRS jack, unbalanced
- Output Level 0 Dbfs
- Balanced +19 / +4 dBu, unbalanced +13 / +7 dBu
- Supported Sample Rates
- 28 kHz up to 200 kHz
- Maximum Input Level 4 Dbu Gain 0 DB
- +13 dBu
- Maximum Input Level 10 Dbv Gain 9 DB
- -5 dBu
- Typical Power Consumption
- 3.7 Watts
- Output Level At 0 Dbfs 1 Kohm Load
- +7 dBu
- Input Impedance
- 1 MOhm
- Output Impedance
- 0.1 Ohm
- Input Impedance Balanced
- 2 kOhm, 5.2 kOhm with PAD
- Current At 5 V Bus Power Operation
- 700 mA (3.7 Watts)
- Max Power 0 1 Thd
- 90 mW
- Input
- 6.3 mm TS jack, unbalanced
- Power Supply
- USB bus power or external power supply
- Idle Power Consumption
- 2.8 Watts
- Maximum Input Level XLR Gain 65 DB
- -57 dBu, PAD -46 dBu
- Maximum Input Level XLR Gain 0 DB
- +8 dBu, PAD +19 dBu
- Input Impedance Unbalanced
- 1 kOhm, 2.6 kOhm with PAD
- Max Power Consumption
- 5.4 Watts
2 detailsSize & weight
- Dimensions Wxhxd
- 108 x 35 x 181 mm (4.25 inch x 1.4 inch x 7.1 inch)
- Weight
- 680
1 detailsIn the box
- Standard
- 8 channels 24 bit, up to 48 kHz
19 detailsOther
- With Pad Active
- -0.1 dB 8 Hz, -0.5 dB < 4 Hz, -1 dB < 3 Hz
- Thd N
- -102 dB, 0.0008 %
- Quad Speed S Mux4
- 2 channels 24 bit 192 kHz
- Thd N 30 DB Gain
- < -100 dB, < 0.001 %
- Channel Separation
- > 110 dB
- Temperature Range
- +5° up to +50° Celsius (41° F up to 122°F)
- Dynamic Range Dr
- 115 dB RMS unweighted, 118 dBA
- Double Speed S Mux
- 4 channels 24 bit 96 kHz
- Gain Range
- -11 dB up to +65 dB
- Jitter Suppression
- > 50 dB (2.4 kHz
- DC 0 Dbfs
- 6.35mm 4.8 V, 3.5mm 2.4 V, XLR bal. 9.6 V
- Lock Range
- 27 kHz – 200 kHz
- Clocks
- Internal, ADAT In, SPDIF In Jitter suppression of external clocks: > 50 dB (2.4 kHz)
- Thd
- - 106 dB, 0.0005 %
- Thd 30 DB Gain
- < -115 dB, < 0.00016 %
- Signal to Noise Ratio Snr
- 114 dB RMS unweighted, 117 dBA
- Noise Level
- -107 dBu
- Hi Speed Mode
- Jitter and response time typically below 1 ms
- Relative Humidity
- 75%, non condensing
