Detail 01
10 inch
Sized to the head, not the shell. Measure your batter head diameter, not the drum's outer rim.

Independent shopping perspective
A single 10-inch internal muffling ring that drops on a drumhead to cut overtones. For drummers wanting a drier, shorter tone without tape.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
Sized to the head, not the shell. Measure your batter head diameter, not the drum's outer rim.
Detail 02
Sits around the head's outer edge, leaving the center open, so stick attack stays intact while sustain drops.
Detail 03
Nothing adheres or mounts. It rests on the head and is held by the stick strike and head tension.
Detail 04
Same material family as the head, so it damps evenly and does not add a dead, papery thud.
Detail 05
One ring covers one drum. A full kit needs a ring per drum in the matching size.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Either, as long as the drumhead is 10 inches. The ring sits on the head surface, so drum type does not matter.
No. It rests loose on top of the head. Nothing adhesive, so it leaves no residue and comes off instantly.
It can slide or hop off under heavy hitting and rimshots. Light to moderate playing keeps it seated.
It shortens sustain and cuts high overtones while leaving attack. Less dramatic than a full pad or tape wads.