Detail 01
31 in.
Matches the bowl diameter, which on timpani is usually printed by the maker. Confirm before ordering.
Product detailSKU #1274034490819
RemoHazy Extended Timpani Head 31 in.
Independent shopping perspective
The Korena take
A 31-inch hazy timpani head with an extended collar. Replacement film for a concert timpano of that bowl size.
Strong match
Who this is for
- Reheading a 31-inch timpano
- Bowls needing extra collar depth to seat properly
- Players replacing a stretched or dented existing head
Consider the trade-offs
When to look elsewhere
- Any timpano of a different bowl diameter
- Drum kit or hand drum use
- Anyone needing a calfskin head for a period setup
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Hazy film
Translucent rather than fully clear. Slightly less top-end glare than clear film, without a coated surface.
Detail 03
Extended collar
Deeper wrap down the bowl, so it seats correctly on drums with more clearance under the counterhoop.
Detail 04
Timpani head
Built for pedal-tuned pitch across a range, so film thickness and collar are cut for even tension.
Detail 05
Synthetic
Holds pitch through humidity changes, unlike calf, which moves with the room.
Final check
Know before you order
- 01Head only. No counterhoop, tension rods, or bowl hardware included.
- 02Reheading a timpano is a slow job — clear the pedal range and clean the bearing edge first.
- 03Verify your drum takes an extended collar. Standard collar heads are cut shallower.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I find my timpani head size?
Measure the bowl diameter across the bearing edge, or check the maker's stamp. Timpani are sized by bowl, and 31 inch is a common large drum.
02What does hazy mean?
The film is translucent rather than fully clear — a middle ground between clear and coated, with slightly less top-end edge.
03What is an extended collar for?
It wraps further down the bowl so the head seats correctly on drums that need the extra depth. Standard collar heads are cut shallower and may not clear.
04Can I mount this myself?
Yes, with patience. Release pedal tension, remove the counterhoop, clean the bearing edge, seat the head, and tension evenly around the drum.
