Detail 01
Three stereo inputs and three stereo outputs
Supports multiple deck combinations and provides an AUX output routable to Serato’s internal sampler.
Product detailSKU #1500000400818
ReloopFlux 6x6 In/Out USB-C DVS Interface for Serato DJ Pro Black
Sale
1/9
Independent shopping perspective
The Korena take
Reloop Flux brings Serato DJ Pro and Serato DVS to a mixer-based turntable, CDJ, or media-player setup. Three stereo inputs can be assigned in any combination, while three stereo outputs include an AUX route for Serato’s internal sampler. Physical Direct Thru buttons let you return connected decks to conventional use without navigating the software. It also works as a 24-bit/96 kHz audio interface, includes a two-port USB-A hub, and can run from computer bus power or external USB-C DC power.
Strong match
Who this is for
- Serato DJ Pro rigs combining turntables, CDJs, or similar players across three stereo inputs.
- Club setups needing physical Thru switching and clearly visible input, output, and connection-status indicators.
- Studio work requiring a 24-bit/96 kHz audio interface alongside DVS routing.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Direct Thru buttons
Lets connected turntables and CDJs operate conventionally without software navigation.
Detail 03
Two-port USB-A hub
Provides connections for MIDI controllers and other USB accessories.
Detail 04
External USB-C DC power support
Allows turntables and CDJs to operate in Thru mode without a connected computer.
Detail 05
USB-C Power Delivery up to 60 W
The second USB-C port can supply Power Delivery to another USB-C device.
Detail 06
Metal enclosure with protected connection edges
The housing is built to shield its connections.
Final check
Know before you order
- 01For Thru-mode operation without a computer, connect an external power source through the USB-C DC input.
- 02The USB-C Power Delivery port supports a maximum throughput of 60 W.
- 03External USB power supplies supported are 5 V/1 A through 20 V/3 A.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does Flux include Serato software access?
It unlocks the full versions of Serato DJ Pro and Serato DVS; additional licenses are not necessary.
02Can I use turntables and CDJs together?
Yes. Its three stereo inputs can accommodate turntables, CDJs, and similar players in any combination.
03Can the decks work without a laptop connected?
Yes, in Thru mode when Flux is powered from an external source through its USB-C DC input.
04What is the interface resolution?
It uses 24-bit/96 kHz digital/analogue converters with ultra-low latency.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
10 detailsConnections & power
- Line Signal Input
- -4 dBV @1K / Less than 0.03% (1 kHz,+0 dB)
- USB Bus Powered
- Yes
- Phono Signal Input
- -36 dBV @1K / Less than 0.05% (1 kHz,+0 dB, Inverse RIAA)
- Recommended Power
- 2 A or higher / minimum power: 400 mA
- Supported External USB Type A or C Power Supply
- 5 V/1 A - 20 V/3 A
- Power Supply Priority
- FLUX self-power -> USB Hub -> PD (to PC)
- Deck in Line Signal Input
- 0 dBV): More than 83 dB
- Maximum USB Hub Power Output
- 2 x 0.8 A = 8 W
- Deck Output
- More than +11 dBV
- Deck in Phono Signal Input
- -32 dBV): More than 73 dB
2 detailsSize & weight
- Dimensions Wxdxh
- 160 x 120 x 34 mm
- Weight
- 0.85
3 detailsOther
- Deck in Line
- More than +7 dBV
- Deck in Phono
- More than -25 dBV
- Maximum USB Pd Throughput
- 60 W
