Detail 01
2 × 8-inch neodymium woofers
The cabinet uses two vented-loaded cone woofers, each powered by its own amplifier channel.
Product detailSKU #1500000379648
RCFTT 808-AS Active Dual 8" Subwoofer
1/8
Independent shopping perspective
The Korena take
RCF’s TT 808-AS is a compact, active dual-8-inch subwoofer built for low-frequency deployment where cabinet height matters. Each vented woofer has its own amplifier channel within the 1,000W RMS system. Rear-panel preset, polarity, and variable-delay controls provide local setup options, while RDNet software adds management and tuning. Rubber feet, pole mounts, and stabilizing brackets support horizontal or vertical placement; it can also work alone, in sub arrays, or alongside a TT 515-A.
Strong match
Who this is for
- Low-profile subwoofer placement requiring horizontal or vertical cabinet orientation.
- Systems needing local preset, polarity, and delay adjustment from the rear panel.
- Subwoofer arrays or low-frequency support paired with a TT 515-A speaker.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
1,000W RMS / 2,000W peak
The specified power rating applies to the active two-channel amplifier system.
Detail 03
40 Hz–400 Hz frequency response
Defines the unit’s stated operating frequency range.
Detail 04
16.93 × 23.76 × 9.59 inches
Its low 9.59-inch profile can help where cabinet height is constrained.
Detail 05
RDNet etherCON
Supports RDNet management and tuning, with etherCON connections listed for input and output.
Final check
Know before you order
- 01Vertical placement uses the supplied stabilizing brackets.
- 02A pole is not required for the stated horizontal or vertical floor placement options.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the TT 808-AS be placed vertically?
Yes. It has rubber feet on two sides, threaded pole mounts for either orientation, and stabilizing brackets for vertical placement.
02How is it tuned?
Use RDNet software or the rear-panel preset buttons, polarity button, and variable delay control.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Input sensitivity
- –2 dBu/+4 dBu
1 detailsBody & build
- Color
- Black
3 detailsConnections & power
- Total power
- 2,000W Peak, 1,000W RMS
- Input connectors
- XLR, RDNet etherCON
- Output connectors
- XLR, RDNet etherCON
1 detailsIn the box
- Cabinet/case material
- Baltic birch plywood
19 detailsOther
- Connections
- powerCON IN/OUT
- Input signal
- Bal/unbal
- Tier
- new
- Controls
- Gain, Equalization, ByPass onboard
- Frequency response
- 40Hz–400Hz
- Max SPL @ 1m
- 129dB
- Category Source
- detail
- Protections
- Excurs.
- Cooling
- Convection
- Dimensions (LxWxH)
- 16.93" x 23.76" x 9.59"
- Color
- Black
- RDNet
- Yes
- Korena Special
- false
- Weight
- 44.09 lb.
- Grille
- Steel
- Woofer
- 2 x 8'' neo, 2.5'' v.c
- Source Id
- site51500000379648
- Low frequencies
- 2,000W Peak, 1,000W RMS
- Limiter
- Fast limiter
Worth comparing
1 of 12
