Detail 01
On/on/on action
All three positions are live. No off position, so the circuit is always connected in one of three states.
Product detailSKU #1292606661756
ProlineMini Toggle Switch On/On/On
Independent shopping perspective
The Korena take
A three-position on/on/on mini toggle for guitar wiring projects. For anyone building or modifying a switching circuit who already knows what they need.
Strong match
Who this is for
- Adding coil-split or series/parallel switching to an existing guitar
- Replacing a failed toggle in a control cavity
- Bench stock for a tech doing regular wiring work
Consider the trade-offs
When to look elsewhere
- Players who don't solder or don't want to drill
- Anyone needing a standard 3-way pickup selector — this is a different switch
- Guitars with thick tops where mini-toggle depth is tight
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Mini toggle format
Small barrel and short bat. Fits a control cavity without crowding knobs, but needs a matched drill hole.
Detail 03
Toggle switch, not rotary
Flip action with tactile detents. Easy to change position mid-song without looking down.
Detail 04
Under $20
Cheap enough to buy two and keep a spare. Failed switches are a common repair, not a rare one.
Final check
Know before you order
- 01No wiring diagram or solder included. You supply the wire and the plan.
- 02Check your cavity depth and required hole diameter before drilling.
- 03Confirm the pole count matches your circuit — on/on/on wiring varies by application.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this a pickup selector switch?
No. It's a mini toggle for auxiliary switching — coil splits, phase, series/parallel. A standard 3-way or 5-way selector is a different part.
02What does on/on/on mean?
The switch has three positions and every one completes a circuit. There is no dead middle position.
03Do I need to drill my guitar?
Unless you're replacing an existing mini toggle in the same hole, yes. The body or pickguard needs a hole sized to the switch barrel.
04Can I install this myself?
If you can solder and read a wiring diagram, yes. Otherwise a tech will do it quickly and cheaply.
