Detail 01
Latching switch
One press mutes and stays muted until you press again. No holding your foot down.
Product detailSKU #1274034489689
ProCoSign Off Latching Muting Switch for Microphones
Independent shopping perspective
The Korena take
A latching footswitch that mutes a microphone line. For singers, speakers, or podcasters who need to cough, talk offstage, or drop out without touching the console.
Strong match
Who this is for
- Vocalists who need to mute between songs without reaching the board
- Houses of worship where a speaker steps away from the mic
- Recording sessions where the talent controls their own cut
- Drum or amp mics that only need to be live part of the set
Consider the trade-offs
When to look elsewhere
- Anyone wanting momentary talk-only operation, since this latches on and off
- Instrument or line-level signals, this is built for mic lines
- Players who want a mute built into their pedalboard signal chain
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Designed for microphones
Sits in the mic line ahead of the preamp, so it mutes before gain is applied.
Detail 03
Footswitch format
Both hands stay free on an instrument, script, or console while you cut the signal.
Detail 04
Black finish
Disappears on a dark stage floor. You will want to mark it if you need to find it fast.
Final check
Know before you order
- 01Confirm your mic cable ends match the switch's connectors before your first gig
- 02Check whether your mic needs phantom power and how muting affects it
- 03Latching switches can pop on some systems, test it at soundcheck
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does it mute instantly or fade out?
It is a switch, so the cut is immediate. That is what you want live, but it also means any pop in your system happens instantly too. Test it at volume first.
02Can I use this on a guitar or bass?
It is built for microphone lines. Instrument signals have different impedance and level, so a mute switch made for instrument level is the better fit there.
03Do I need batteries or power?
No power section is part of this. It is a mechanical switch in the signal path.
04Will it work with a condenser mic on phantom power?
Interrupting a phantom-powered line can cause a thump when you switch back on, and the mic may need a moment to recover. Try it with your specific mic and preamp before relying on it.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
