Detail 01
42mm length
Measured on the threaded shank. Too short and it will not reach the lug; too long and it bottoms out.
Product detailSKU #1274034489021
PearlTom and Snare Tension Rods 42mm
Independent shopping perspective
The Korena take
Replacement 42mm tension rods for Pearl toms and snares. Buy these when rods are stripped, bent, or lost.
Strong match
Who this is for
- Replacing stripped or cross-threaded rods on a Pearl tom
- Keeping spares in the stick bag for gigs
- Restoring a used Pearl drum with missing hardware
Consider the trade-offs
When to look elsewhere
- Drums using a different rod length — 42mm will not span correctly
- Non-Pearl kits without confirming thread pitch
- Anyone needing lugs, washers, or hoops
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Tension rod, not a lug
This is the bolt you turn with a drum key. The lug it threads into stays on the shell.
Detail 03
Pearl thread
Thread pitch has to match your lugs. Forcing a mismatched rod will strip the lug, which is the expensive part.
Detail 04
Tom and snare sizing
Sized for rack toms and snares, not bass drum claws, which use longer rods.
Final check
Know before you order
- 01Washers are not always part of a rod purchase — reuse your old ones
- 02Pull one existing rod and measure before ordering
- 03Check the quantity in the pack against how many you need
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I know if I need 42mm?
Remove one working rod from your drum and measure the threaded portion. Match that length. Rod length varies by drum depth and lug design.
02Will these fit my non-Pearl drum?
Only if thread pitch and length match. Test-thread one by hand into a lug before tightening anything down.
03How many rods come in this?
Check the listed quantity. A standard tom needs rods equal to the lug count, doubled if both heads are tensioned.
04Can I use these on my bass drum?
No. Bass drum claws take longer rods. These are sized for tom and snare depths.
