Detail 01
Lug
The shell-mounted casing that threaded tension rods screw into. A stripped one means that rod cannot hold tension.
Product detailSKU #1274034489240
PearlCL100 Lug for M712SE Snare
Independent shopping perspective
The Korena take
Replacement lug for the Pearl M712SE snare. Buy it if a lug on that drum is cracked, stripped, or missing.
Strong match
Who this is for
- Repairing a stripped or cracked lug on an M712SE snare
- Keeping a spare for a drum you gig with regularly
- Restoring a used M712SE bought with missing hardware
Consider the trade-offs
When to look elsewhere
- Other snare models, where lug spacing and hole pattern differ
- Anyone after a tone or sound change from their snare
- Players needing tension rods or a full hardware set
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
M712SE-specific
Hole spacing and mounting screws are matched to that shell. Other snares drill differently and will not line up.
Detail 03
Sold as one lug
A snare typically uses eight to ten. Order one per damaged position, not per drum.
Detail 04
$23.99
Per-lug cost, so replacing a full set approaches what a budget snare costs outright.
Final check
Know before you order
- 01Mounting screws and gaskets may not be included — check what you can reuse
- 02You must detune and remove the head to reach the lug from inside the shell
- 03Confirm your snare is the M712SE; other Pearl models use different lugs
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I replace a snare lug?
Detune fully, remove the head and hoop, unscrew the lug from inside the shell, seat the new one with its gasket, then reassemble and retune.
02Will this fit other Pearl snares?
It is specified for the M712SE. Lug shape and screw spacing vary across Pearl lines, so check your model first.
03Do I need to replace all the lugs at once?
No. Replace only the damaged ones. Mixed-age lugs hold tension the same as long as the threads are good.
04Does this include tension rods?
No. This is the lug casing only. Reuse your existing rods or buy them separately.
