Detail 01
10.5mm
The tom arm diameter it accepts. An arm even a millimeter off will not clamp securely.
Product detailSKU #1316478167797
PDP by DW10.5mm Tom Bracket
1/2
Independent shopping perspective
The Korena take
A 10.5mm tom mounting bracket from PDP. A cheap replacement or spare for drummers whose tom arm hardware is worn, lost or mismatched.
Strong match
Who this is for
- Replacing a stripped or lost bracket on an existing PDP kit
- Keeping a spare in the hardware case for gigs
- Mounting a tom on a stand or rack using 10.5mm arms
Consider the trade-offs
When to look elsewhere
- Anyone with thicker or thinner tom arms than 10.5mm
- Drummers needing the tom arm itself — this is the bracket only
- Players wanting an upgrade in feel; this is a functional part
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Tom bracket
The receiver that holds the tom arm. Not the arm, not the tom holder assembly on the stand.
Detail 03
PDP by DW
Sized around PDP and DW hardware, so fit on other brands depends on their arm diameter.
Detail 04
Low price point
A single hardware part rather than a mounting system. Budget for more than one if you're fitting several toms.
Final check
Know before you order
- 01Measure your existing tom arm with calipers before ordering — 10.5mm is not universal
- 02One bracket per listing; a multi-tom setup needs several
- 03Mounting screws and drum-shell hardware may not be included
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What does 10.5mm refer to?
The diameter of the tom arm the bracket accepts. Match it to your existing hardware or the arm will slip or not fit.
02Will this fit a non-PDP kit?
Only if that kit uses 10.5mm tom arms. Measure first — arm diameters vary between brands and even between series.
03Does it include the tom arm?
This is the bracket. Plan on sourcing the arm separately if you don't already have one.
04Do I need to drill my drum?
It depends on your shell's existing mounting holes. Compare the bracket's hole spacing to what's already on the drum.
