Detail 01
Controls: Volume, EQ, Octave, Fuzz
The pedal provides separate level, EQ, octave, and fuzz controls.
Product detailSKU #1500000142596
Orange AmplifiersFur Coat Fuzz/Octave Effects Pedal
aggressivehigh outputrockpsychedelicstoner rock
1/6
Independent shopping perspective
The Korena take
Orange Fur Coat pairs vintage-style fuzz with an octave-up control that can be blended rather than simply switched fully on or off. Volume, EQ, Octave, and Fuzz make the effect adjustable for a clean amp or one already carrying some drive; Orange describes the latter combination as producing a thick layer of vintage fuzz. It is the company’s true-bypass pedal and is intended to sit first in the chain, connected straight from the guitar.
Strong match
Who this is for
- Placing fuzz first in a pedal chain, directly after the guitar, before subsequent effects.
- Blending octave-up into a vintage-fuzz sound rather than using only a fixed full-octave setting.
- Running fuzz into either a clean amplifier or an amplifier already carrying some drive.
Consider the trade-offs
When to look elsewhere
- Pedal chains with a buffer before the fuzz, which makes the fuzz more distortion-like and the octave more pronounced.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
True bypass
The Fur Coat is Orange’s only true-bypass pedal.
Detail 03
3mA at 9V
The listed current draw is 3mA at 9V.
Final check
Know before you order
- 01Place it at the front of the chain and connect it directly to the guitar.
- 02Use a regulated 9-12V DC centre-negative power supply.
- 03To adjust octave with the guitar volume between 8 and 10, set the pedal’s Octave control below maximum.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the octave effect adjustable?
Yes. Increasing the Octave control adds octave-up, rather than limiting it to an on/off setting.
02Where should the Fur Coat go in my pedal chain?
It is intended to be first in the chain, directly connected to the guitar.
03Can I use it into an overdriven amp?
Yes. It can be used into a clean amp or one with some drive.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Controls
- Volume, EQ, octave, fuzz
1 detailsBody & build
- Color
- Orange
2 detailsSize & weight
- Weight
- 1.15
- Dimensions
- 3.7 x 5.1 x 2.6 in. (9.5 x 13 x 6.5 cm)
1 detailsOther
- Current Draw
- 9V 3mA
