Detail 01
5/8-27 on both ends
It threads onto a standard US stand and accepts a standard US clip. No conversion happens here.
Product detailSKU #1274115029519
On-StageQK-2B Quik-Release Mic Adapter
1/5
Independent shopping perspective
The Korena take
A 5/8-27 threaded adapter with a push-button release, so a mic clip comes off the stand without unscrewing it. For quick mic swaps.
Strong match
Who this is for
- Swapping mics between songs without unthreading a clip
- Multi-mic stage setups where changeovers need to be fast
- Studios where one stand serves several mics
Consider the trade-offs
When to look elsewhere
- Anyone with only one mic that stays on one stand
- Stands or clips using anything other than 5/8-27 threading
- Users needing a European 3/8 thread without a separate adapter
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Quik-release button
Press the button and the clip half lifts straight off. The stand keeps the threaded half.
Detail 03
Tool-free release
Changeovers happen in the dark mid-set with one hand. No twisting, no dropped clips.
Detail 04
Shock-absorbing washer
Cuts some stand-borne thump traveling up into the mic from stage vibration and handling.
Detail 05
Adapter, not a clip
It sits between stand and clip and adds a small amount of height to the mic position.
Final check
Know before you order
- 01No microphone or mic clip included. This is the coupler only.
- 02Confirm your stand and clip are 5/8-27, not 3/8 European thread.
- 03You need one per mic clip to get the full quick-swap benefit.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does this come with a mic clip?
No. It threads onto your existing stand and accepts your existing 5/8-27 clip. Buy the clip separately.
02Will it fit a 3/8 European stand?
Not directly. Both ends are 5/8-27. You would need a separate 3/8-to-5/8 thread adapter below it.
03Do I need one for every mic?
You need one half on each clip you want to swap, and one on each stand. One unit covers one stand-and-clip pair.
04Does it help with handling noise?
The shock-absorbing washer damps some vibration coming up the stand. It is not a shockmount and will not replace one.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
7 detailsOther
- Product Type
- Microphone adapter
- Shock Absorbing Washer
- Yes
- Model
- QK-2B
- Threading
- 5/8 inch-27 on both ends
- Fits
- Standard mic stands and mic clips
- Quik Release Button
- Yes
- Tool Free Release
- Yes
