Korena
Product detailSKU #1274115029485

On-StageMS7701B Tripod Mic Stand With Boom

On-Stage
On-Stage MS7701B Tripod Mic Stand With Boom
1/3

Independent shopping perspective

The Korena take

Tripod boom mic stand for stage or rehearsal use. Buy it if you need a standard-height stand for a vocal or amp mic without spending much.

On-Stage MS7701B Tripod Mic Stand With Boom product detail
Product studyOn-Stage MS7701B Tripod Mic Stand With Boom
On-Stage MS7701B Tripod Mic Stand With Boom alternate view
Alternate view

Strong match

Who this is for

  • Vocalists needing height adjustment between sitting and standing
  • Miking a guitar cab where the boom reaches over the grille
  • Rehearsal rooms and practice spaces buying several stands at once

Consider the trade-offs

When to look elsewhere

  • Heavy ribbon or large-diaphragm condensers that overload a light boom
  • Overhead drum miking, which needs a taller stand and heavier base
  • Touring rigs where nightly setup wears out budget hardware

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Tripod base

Folds flat for transport and sits stable on uneven floors, but the legs eat pedalboard and floor space.

Detail 02

Boom arm

Lets you angle the mic in from the side, so the stand base stays clear of a player or amp.

Detail 03

Threaded mic clip mount

Standard mic thread accepts most clips and shockmounts, though adapters are sometimes needed between 5/8 and 3/8 sizes.

Detail 04

Adjustable height shaft

Twist clutch sets height for seated or standing use; a heavy mic can slowly creep down over a long set.

Detail 05

Budget price point

Hardware is lighter gauge than road stands. Fine for regular use, less forgiving of drops and constant teardown.

Final check

Know before you order

  1. 01No microphone included; check whether a mic clip ships with it
  2. 02Counterweight the boom or keep the mic close to the shaft
  3. 03Threads vary by mic brand; a 5/8-to-3/8 adapter may be needed

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this hold a Shure SM58?

Yes. A standard dynamic handheld mic is well within what this stand carries, on the boom or straight up.

02How tall does it go?

It adjusts across a normal vocal range for seated and standing use. Check the listed height range against your specific need.

03Does the boom arm come off?

The boom mounts to the top of the shaft and can be removed to use the stand straight.

04Is it good for recording?

For dynamic mics and small condensers, yes. Heavier studio condensers in shockmounts are better served by a weightier stand.

Worth comparing

More from On-Stage