Detail 01
3.5 lb device capacity
The spring system is intended to counterbalance microphones or other devices up to that weight.
Product detailSKU #1500000279116
On-StageMBS5000 Broadcast Mic Boom Black
1/8
Independent shopping perspective
The Korena take
On-Stage’s MBS5000 is an articulating boom for broadcast and webcast microphone setups. Two pairs of springs counterbalance microphones or other devices up to 3.5 lb, allowing quiet, repeatable repositioning while on-air. Its square tubing houses a pre-installed 10-foot XLR cable to keep the cable run within the boom. The 5/8-inch-27 threaded stem works with common mic clips and leaves room for oversized shock mounts. Mount it with the removable C-clamp or the screw-in flange mount.
Strong match
Who this is for
- Broadcast or webcast positions where a microphone needs quiet, repeatable adjustment during an on-air session.
- Desk-mounted microphone setups using the removable C-clamp on surfaces up to 2 inches thick.
- Permanent desktop or overhead installations using the screw-in flange mount.
Consider the trade-offs
When to look elsewhere
- Microphones or devices weighing more than 3.5 lb.
- C-clamp installations on surfaces thicker than 2 inches.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
10-foot internal XLR cable
The XLR cable is already installed within the boom tubing for a cleaner appearance.
Detail 03
5/8-inch-27 threaded stem
It mates with common mic clips and provides room for oversized shock mounts.
Final check
Know before you order
- 01For C-clamp mounting, confirm the desktop or other surface is no more than 2 inches thick.
- 02Keep the microphone or device weight at or below 3.5 lb.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does the MBS5000 include an XLR cable?
Yes. A 10-foot XLR cable is pre-installed inside the boom tubing.
02How can the MBS5000 be mounted?
It includes a removable C-clamp for surfaces up to 2 inches thick and a screw-in flange mount for permanent desktop or overhead installation.
03What microphone weight can it support?
Its spring counterbalance is intended for broadcast microphones or other devices weighing up to 3.5 lb.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
