Detail 01
Bassline mode
Applies the octave effect only below a defined split point.
Product detailSKU #1500000480152
NUXTutti Polyphonic Octave Pedal - Purple
1/6
Independent shopping perspective
The Korena take
Tutti is a compact polyphonic octave pedal with high- and low-octave voices for guitar or bass rigs. Use Polyphonic mode to combine both octave voices with the dry signal, Bassline mode to keep notes above its split point clean, or Momentary mode for footswitch-held accents. Bypass operation is selectable as true or buffered when powering up. Its 9V DC requirement and small enclosure make it straightforward to place on a pedalboard, while USB supports firmware updates.
Strong match
Who this is for
- Adding high and sub-octave voices to chord passages and single-note parts.
- Covering lower-frequency bass parts while keeping notes above the split point clean.
- Using footswitch-held octave accents during controlled performance transitions.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Momentary mode
The octave effect remains active only while the footswitch is pressed.
Detail 03
Selectable True Bypass or Buffered Bypass
Lets you choose the bypass method at power-up.
Final check
Know before you order
- 01Requires a 9V DC negative-tip power supply; no power supply is included.
- 02Bypass mode is selected when the pedal powers up.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What happens in Polyphonic mode?
It layers both high- and sub-octave voices with your dry signal.
02Can I use the octave only for brief accents?
Yes. Momentary mode engages the effect only while the footswitch is held.
03Can Tutti receive firmware updates?
Yes. Its USB port supports firmware updates.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsPickups & controls
- Footswitches
- On and off
- Control Knobs
- Not specified
1 detailsBody & build
- Color
- Purple
4 detailsConnections & power
- USB
- Firmware update port
- Output
- 1/4 inch
- Input
- 1/4 inch
- Power Requirement
- 9V DC negative tip
4 detailsSize & weight
- Weight
- 0.39
- Depth
- 3.70 inch
- Width
- 2.01 inch
- Height
- 2.09 inch
1 detailsIn the box
- Power Supply Included
- ✕ Not included
4 detailsOther
- Modes
- Polyphonic, Bassline, Momentary
- Current Draw
- Less than 150 mA
- Product Type
- Polyphonic octave pedal
- Model
- NPO-2 Tutti
