Detail 01
1 ms system latency
The specified system latency is 1 ms.
Product detailSKU #1500000376636
NUXTape Echo Multi Tape Head Space Echo With Tap Tempo and Looper Effects Pedal Black
dynamicambientpost rockshoegazerockpsychedelic
1/10
Independent shopping perspective
The Korena take
Tape Echo is a black delay pedal built around tape-echo characteristics, with tap tempo and looper functions in a dual-foot-switch enclosure. Core-Image technology covers controls for bass, treble, repeat rate, intensity, echo volume, and reverb volume, alongside wow, flutter, and saturation characteristics. It can also enter self-regeneration and self-oscillation. The unit does not use tape reels; its described tape transport uses a capstan drive and a protected tape chamber beneath a plastic panel.
Strong match
Who this is for
- Dialing repeat rate, intensity, echo level, and reverb level from dedicated Tape Echo controls.
- Creating tape-echo movement with adjustable wow, flutter, and saturation characteristics.
- Using self-regeneration and self-oscillation from the dual-foot-switch stompbox enclosure.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
48 kHz sampling rate and 32-bit signal processing
The pedal operates at the stated sampling rate and processing depth.
Detail 03
9V DC, negative tip
It uses negative-tip 9V DC power; the ACD-006A adapter is optional.
Final check
Know before you order
- 01Power is specified as 9V DC with a negative-tip connection; the ACD-006A adapter is optional.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Does the Tape Echo use tape reels?
No. Its described transport uses a capstan drive, with the tape loop held in a protected tape chamber under a plastic panel.
02Can it self-oscillate?
Yes. Self-regeneration and self-oscillation are possible.
03What delay controls are available?
Bass, Treble, repeat rate, Intensity, Echo volume, and Reverb volume controls are included.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Frequency Response
- 20Hz–20kHz - ±1dB
- Power
- 9V DC(Negative tip, Optional ACD-006A adapter)
1 detailsBody & build
- Color
- Black
4 detailsConnections & power
- Input Impedance
- 5 mohm
- Output Impedance
- 100 ohm
- Maximum Output Level
- 1.5Vrms
- Maximum Input Level
- 1.5Vrms
7 detailsOther
- Dynamic Range
- 103dBu/105dBu(A-Weighting)
- Thd N Ratio
- 0.0038% @ input 1Vrms 1kHz, 0.01% @ input 1.5Vrms 1kHz
- Current Draw
- Approximately 100mA, 150mA
- System Latency
- 1ms
- Sampling Rate
- 48kHz
- A D Converter
- 32-bit
- Signal Processing
- 32-bit
