Detail 01
Selectable true bypass or buffered bypass
Choose the pedal's bypass mode during power-up by holding the footswitch; red indicates true bypass and green indicates buffered bypass.
Product detailSKU #1500000306819
NUXMorning Star Overdrive Effects Pedal
aggressivehigh outputwarmmetalrockhard rock
1/2
Independent shopping perspective
The Korena take
Morning Star is an overdrive pedal for adding saturated grit to a clean guitar sound. Lower Drive settings keep the overdrive balanced, while higher settings bring in thicker gain. Its Tone control covers darker settings through to a brighter response, and the press-and-hold Shine function adds further brightness when needed. You can also choose true bypass or buffered bypass to suit the role it plays in your signal chain.
Strong match
Who this is for
- Building a guitar signal chain where true-bypass or buffered-bypass operation is required.
- Moving from balanced clean-tone overdrive to thicker gain with one Drive control.
- Adding extra high-frequency brightness on demand with the footswitch-held Shine circuit.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
9V DC, center negative, over 100mA
The pedal requires a compatible 9V center-negative power source.
Final check
Know before you order
- 01A power supply is required; none is included.
- 02Set the bypass mode by holding the footswitch while powering the pedal on.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01How do I activate Shine?
Press and hold the footswitch to engage the Shine circuit, which adds brightness.
02Can I select the bypass mode?
Yes. Power up while holding the footswitch to choose true bypass or buffered bypass.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
3 detailsConnections & power
- Input Impedance
- 1M ohm
- Output Impedance
- 1K ohm
- Power Requirement
- 9V DC, center negative >100mA (power supply not included)
2 detailsSize & weight
- Weight
- 6
- Dimensions
- 3.7 inch x 2 inch x 2.08 inch (94 x 51 x 53 mm)
