Detail 01
Analog dry signal
Your unaffected signal remains on an analog path.
Product detailSKU #1500000394890
NeunaberImmerse Reverberator Mk II Stereo Reverb Effects Pedal Black
dynamicambientpost rockshoegazerockalternative
1/6
Independent shopping perspective
The Korena take
Eight stereo reverb sounds give the Immerse Reverberator Mk II a compact way to cover different ambient effects without a complicated operating scheme. Run stereo outputs when the rig calls for a wider reverb image, or use output 1 alone to sum a stereo input to mono for a single-amp setup. The dry path stays analog, while the pedal accepts instrument or consumer line-level signals. It needs a compatible 9V or 12V DC, 100mA power source.
Strong match
Who this is for
- Stereo pedalboard rigs that need several reverb options in one straightforward pedal.
- Changing from a stereo setup to one amplifier without rerouting the input signal.
Consider the trade-offs
When to look elsewhere
- Setups without a center-negative 9–12V DC supply capable of providing 100mA.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Stereo-to-mono operation
With only output 1 connected, a stereo input is summed to mono.
Final check
Know before you order
- 01A power supply is required and sold separately.
- 02Use a center-negative connector measuring 5.5 mm OD by 2.1 mm ID.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use it with one amplifier?
Yes. Connect output 1; it sums a stereo input to mono.
02What power does it need?
Use 9–12V DC at 100mA with a center-negative 5.5 mm OD by 2.1 mm ID connector.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–30kHz
1 detailsBody & build
- Color
- Black
4 detailsConnections & power
- Input Impedance
- 1 mohm
- Input
- 9–12V DC, 100mA
- Connector
- Center-negative, 5.5 mm OD x 2.1 mm ID
- Input Level
- Instrument/consumer line level
2 detailsSize & weight
- Weight
- 6.7
- Dimensions
- 2.6 inch x 4.6 inch x 1.9 inch (63 mm x 115 mm x 46 mm)
1 detailsOther
- Total Harmonic Distortion
- < 0.01%
