Detail 01
Lo-Z (low impedance)
Matches standard dynamic and condenser mics, so you can run long lengths without losing high end.
Product detailSKU #1281539726426
Musician's GearLo-Z XLR Microphone Cable - 15 ft.
Sale
1/3
Independent shopping perspective
The Korena take
A 15-foot balanced XLR cable for microphones. Basic connection for stage, rehearsal or home recording at the lowest price tier.
Strong match
Who this is for
- Connecting a mic to a mixer or interface at rehearsal
- Spare cable to keep in a gig bag or case
- Home studio where the mic sits near the interface
Consider the trade-offs
When to look elsewhere
- Long stage runs — 15 feet gets tight across a large stage
- Instrument or line-level gear using 1/4-inch jacks
- Nightly touring use where cables get stepped on constantly
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
XLR both ends
Three-pin connectors for mic inputs. It will not plug into a guitar amp or 1/4-inch jack.
Detail 03
Balanced signal
Two signal wires cancel noise picked up along the run, so it stays quieter near lights and power cables.
Detail 04
15 feet
Enough to reach a mixer a few steps away. Vocalists who move around want 20 to 25 feet.
Final check
Know before you order
- 01Check your mic input is XLR, not 1/4-inch or USB
- 02Phantom power passes through, but the cable does not supply it
- 03Buy a spare — cables fail at the connector before anything else
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this work with a condenser mic?
Yes. It carries phantom power from your mixer or interface to the mic along the same cable.
02Can I use it as a guitar cable?
No. Guitars use 1/4-inch jacks. This has XLR connectors on both ends and will not fit.
03Is 15 feet long enough for live use?
For a mic on a stand near the mixer, yes. If you sing at the front of a larger stage, get 25 feet.
04Which end goes into the mic?
The female end with holes plugs into the mic. The male end with pins goes into the mixer or interface.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
