Detail 01
Pro strength formula
Aimed at grime and haze a dry cloth will not lift, rather than a light dusting between sessions.
Product detailSKU #1292606661387
Music NomadGuitar Polish - Pro Strength Formula
1/11
Independent shopping perspective
The Korena take
The stronger polish in Music Nomad's line, for gloss guitar finishes with built-up grime or haze. Overkill for a routine post-play wipe.
Strong match
Who this is for
- Bringing back a gloss finish that has gone dull or hazy
- Cleaning up a used guitar before selling or after long storage
- Removing arm sweat residue and belt haze a dry cloth leaves behind
Consider the trade-offs
When to look elsewhere
- Satin or matte finishes — polish can buff them to unwanted shine
- Fretboards, which need oil or conditioner, not polish
- Daily upkeep; a dry microfiber cloth is enough between deep cleans
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Polish, not a cleaner-only product
It both lifts residue and leaves the gloss surface even, which is why hazy finishes look deeper afterward.
Detail 03
For gloss finishes
Gloss can be worked and buffed. Satin and matte rely on a deliberately scattered surface that polishing changes permanently.
Detail 04
Cloth-applied liquid
Apply to the cloth, not the guitar. Liquid running into pickup routes, the bridge or a soundhole is the common mistake.
Detail 05
Under ten dollars
A little covers a whole body. Most players use this a few times a year, not weekly.
Final check
Know before you order
- 01You need two clean microfiber cloths: one to apply, one to buff off
- 02Test on the back of the body before working the top
- 03Keep it off the fretboard, nut and bridge saddles — polish belongs on finished surfaces
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use this on a satin or matte guitar?
No. Polishing a satin or matte finish creates shiny patches that cannot be undone. Wipe those finishes down dry instead.
02Is it safe on nitrocellulose lacquer?
Nitro is softer and thinner than poly, so work gently, use light pressure and test on the back of the body first.
03How often should I use it?
Only when the finish looks dull or grimy — a few times a year for most players. Everyday care is a dry microfiber wipe.
04Can I use it on the fretboard?
No. An unfinished rosewood or ebony board needs a fretboard oil or conditioner. Polish is for finished surfaces only.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Pro Strength Formula
