Korena
Product detailSKU #1500000348407

MESA/BoogieMIDI Matrix Switcher

MESA/Boogie
MESA/Boogie MIDI Matrix Switcher
1/7

Independent shopping perspective

The Korena take

MESA/Boogie's MIDI Matrix Switcher centralizes amplifier control for compact pedalboards and small rack systems. It can work with an existing MIDI controller or replace a Mesa multi-pin factory footswitch, placing channel, mode, and feature changes under a single command. Reverb, EQ, and power can be switched separately or grouped, with control for up to three amplifiers at once. Its 250 presets give multi-set or multi-band rigs room to organize repeatable configurations, while its isolated switching jacks address ground-loop hum and noise.

MESA/Boogie MIDI Matrix Switcher product detail
Product studyMESA/Boogie MIDI Matrix Switcher
MESA/Boogie MIDI Matrix Switcher alternate view
Alternate view

Strong match

Who this is for

  • Compact pedalboard or small-rack rigs needing one-button amplifier channel and feature changes.
  • Multi-amplifier setups requiring grouped control of up to three amplifiers.
  • Set lists needing stored amplifier configurations across 250 available presets.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

MESA/Boogie MIDI Matrix Switcher construction detail

Detail 01

250 presets

Stores multiple amplifier-control configurations.

Detail 02

8-pin DIN and two 1/4-inch TRS switching jacks

These switching connections are isolated to prevent ground-loop hum and noise.

Detail 03

9–12V DC operation

The switcher requires DC power within that voltage range and draws up to 250mA at 9V DC.

Detail 04

5.23 × 4 × 1.59 inches

A compact format for pedalboard or small-rack placement.

Final check

Know before you order

  1. 01Provide 9V to 12V DC power; maximum current draw is 250mA at 9V DC.
  2. 02Confirm the required switching connection: the unit has one 8-pin DIN and two 1/4-inch TRS switching jacks.
MESA/Boogie MIDI Matrix Switcher close-up

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can the MIDI Matrix control more than one amplifier?

Yes. It can control up to three amplifiers at once.

02Can it replace a Mesa factory footswitch?

Yes. It can replace a Mesa amplifier's multi-pin cabled factory footswitch.

03How many presets are available?

The MIDI Matrix provides 250 presets.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsConnections & power
Minimum Operating Voltage
9V DC
Maximum Operating Voltage
12V DC
2 detailsSize & weight
Weight
0.9
Dimensions
5.23 inch W x 4 inch D x 1.59 inch H
2 detailsOther
Maximum Current Draw
250mA @ 9V DC
Bottom Mounting Plate Rotatable W X D X H
4.97 inch W x 3.69 inch D x 0.063 inch H