Detail 01
48V phantom power
Phantom power is provided at 48V.
Product detailSKU #1500000433161
LEWITTCONNECT 2 USB-C Audio Interface
Sale
1/7
Independent shopping perspective
The Korena take
LEWITT’s CONNECT 2 is a USB-C audio interface designed to simplify recording setup without leaving the signal-shaping tools behind. Connect a microphone or instrument, then use Auto Setup to analyze the input and create gain, EQ and compression settings; Auto Gain can set the level in seconds. Clear, Warm and Vivid preamp modes, a Compressor, Denoiser and Clipguard give you hands-on control. Loopback and dedicated streaming mode also support computer-audio capture and streaming workflows.
Strong match
Who this is for
- Recording a microphone or instrument when you want guided gain, EQ and compression setup.
- Capturing computer audio for streaming, voiceover recording or sampling through the Loopback channel.
- Practicing with tracks from a device or DAW using zero-latency monitoring.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
60 dB gain range
The input gain range is 60 dB.
Detail 03
121 dB (A) dynamic range with Clipguard
The listed dynamic-range figure applies with Clipguard.
Detail 04
Loopback
It can capture audio from the connected computer.
Detail 05
DSP powered
The interface includes DSP-powered processing.
Detail 06
20 Hz–20 kHz frequency response
The listed frequency response spans 20 Hz to 20 kHz.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can CONNECT 2 help set input level?
Yes. Auto Gain sets the input level, and Auto Setup analyzes the signal for gain, EQ and compression settings.
02Can it capture audio playing on my computer?
Yes. Its Loopback channel captures computer audio for uses including streaming, voiceovers and sampling.
03What software is bundled?
Cubase LE and Cubasis LE are included.
04Does it provide phantom power?
Yes. It provides 48V phantom power.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Impedance
- 1.9 Ohm
- Frequency Response
- 20Hz–20kHz
1 detailsBody & build
- Loopback
- Yes
6 detailsConnections & power
- Input Impedance
- 2.5 MOhm
- Equivalent Input Noise
- -108dBV (A)
- Phantom Power
- 48V
- DSP Powered
- Yes
- Max Output Level
- 6.8dBV (high impedance mode)
- Connector
- 3.5 mm (1/8 inch) stereo jack, 6.3 mm (1/4 inch) stereo jack
4 detailsOther
- Total Harmonic Distortion Noise
- 0.003%
- Asio Driver
- Yes
- Gain Range
- 60dB
- Dynamic Range
- 121dB (A) with Clipguard
