Detail 01
6 in-line layout
All six tuners on one side. Strat, Tele and similar necks only.
Product detailSKU #1274115039935
Kluson6 In-Line Vintage Tuning Machines Nickel
Independent shopping perspective
The Korena take
Nickel vintage-style tuners in a 6 in-line layout for Strat and Tele headstocks. Replacement part for worn or non-original tuners.
Strong match
Who this is for
- Bringing a Strat or Tele back to vintage-correct hardware
- Replacing tuners that slip or bind on a 6 in-line headstock
- Partscaster builds using a vintage-spec neck
Consider the trade-offs
When to look elsewhere
- Les Paul and SG headstocks — those take the 3-per-side set
- Players who want locking posts and fast restringing
- Anyone with a modern neck drilled for larger peghole bushings
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Vintage-style
Slotted-post design, so you cut the string, drop it in and wind down. Different technique than modern hole-through posts.
Detail 03
Nickel finish
Ages and dulls with hand contact instead of holding a bright mirror shine, which is why it suits older-style builds.
Final check
Know before you order
- 01Vintage tuners use smaller pegholes than modern ones — measure before ordering
- 02Vintage press-in bushings may need a press or careful tapping to seat
- 03Existing screw holes often don't align; expect plugging and redrilling
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit a modern Fender neck?
Often not directly. Modern necks are usually drilled for larger bushings. Measure your peghole diameter against the tuner post and bushing first.
02How do slotted posts work?
Feed the string down the center hole, cut to length, seat it in the slot, then wind downward. It keeps the string neat at the post.
03Can I install these myself?
If the peghole and screw pattern match, yes. If the bushings press in or holes need redrilling, take it to a tech.
04Do these fit a Les Paul?
No. A Les Paul headstock is 3-per-side. Use the 3-per-side Kluson set instead.
