Detail 01
Adjustable-depth rack slides
The chassis can be pulled completely forward from the cabinet while remaining supported.
Product detailSKU #1500000041298
JMR ElectronicsLTNG-XQ-3-RMMP Mac Pro RAID Storage System
Independent shopping perspective
The Korena take
Built around a Mac Pro and a three-bay, disk-ready RAID section for 3.5-inch rotating drives, the LTNG-XQ-3-RMMP puts storage and expansion access in one rack-mounted chassis. Its adjustable slides bring the entire unit forward from the rack while keeping it supported. Remove the two-thumb-screw top cover to reach the interior, including the Thunderbolt-to-PCIe card area, for servicing, connection changes, or PCIe-card swaps.
Strong match
Who this is for
- Rack installations where the chassis needs to slide forward for interior servicing and connection changes.
- Using existing 3.5-inch rotating drives in a three-bay RAID storage arrangement.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Two thumbscrews on the top cover
Interior access does not require a multi-screw cover removal.
Detail 03
Three 3.5-inch drive bays
The RAID section is arranged for 3.5-inch rotating disk drives.
Detail 04
Up to 30TB native capacity
The stated maximum native storage capacity is 30TB.
Final check
Know before you order
- 01Confirm your rack can accommodate the adjustable-depth mounting slides.
- 02The three-bay RAID section is intended for 3.5-inch rotating drives.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the chassis be serviced while it remains mounted?
Yes. The adjustable slides let the chassis move fully forward of the cabinet while supported.
02How is the top cover removed?
It is secured with two thumbscrews.
03What drive format is the RAID section designed for?
It is a three-bay subsystem for 3.5-inch rotating disk drives.
