Korena
Product detailSKU #1500000311659

JHS PedalsColour Box V2 Preamp Pedal

JHS Pedals
bluespoprockgarage rockblues rock
JHS Pedals Colour Box V2 Preamp Pedal
1/3

Independent shopping perspective

The Korena take

Colour Box V2 is a preamp, EQ, and distortion pedal built to take either an instrument or microphone through its XLR/1/4-inch combo input. Gain is shaped with Master, Pre-Vol, and five Step settings, while the Hi/Lo switch shifts the balance between clean headroom and quicker breakup. Three EQ bands have dedicated Shift controls for more precise frequency targeting, and the switchable high-pass filter handles 60–800Hz. Silent switching and phantom-power pass-through suit routing changes where clean operation matters.

JHS Pedals Colour Box V2 Preamp Pedal product detail
Product studyJHS Pedals Colour Box V2 Preamp Pedal
JHS Pedals Colour Box V2 Preamp Pedal alternate view
Alternate view

Strong match

Who this is for

  • Routing either an instrument or microphone into one preamp and EQ pedal
  • Dialing focused boosts or cuts by moving each EQ band’s frequency range
  • Keeping a clean signal in Lo mode while shaping tone without distortion

Consider the trade-offs

When to look elsewhere

  • Using the -20dB pad with the 1/4-inch instrument input; it operates only in XLR mode

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Hi/Lo switch

Lo mode provides ultra-clean sounds without breakup; Hi mode reaches overdrive, distortion, and fuzz more readily.

Detail 02

Treble, middle, and bass EQ with Shift controls

Each band can boost or cut by ±17dB, while its Shift control changes the frequencies it addresses.

Detail 03

60–800Hz high-pass filter

A toggle engages a 6dB-per-octave high-pass section across that range.

Detail 04

XLR/1/4-inch combo input

Accepts either a microphone or instrument, selected by the INST/XLR switch.

Final check

Know before you order

  1. 01Use standard 9V DC negative power.
  2. 02Select INST or XLR input mode before connecting your source.
  3. 03The -20dB pad is available only when using XLR input mode.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can Colour Box V2 pass phantom power?

Yes. It safely passes 48V phantom power to condenser microphones.

02Does it work with both microphones and instruments?

Yes. Its combo input accepts either, with an INST/XLR selector switch.

03What does the Pre-Vol control do?

It sets gain between the pedal’s two internal gain stages, adding more grit, distortion, and fuzz as it increases.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

2 detailsConnections & power
Input
XLR-1/4 inch combo
Power Requirement
9V DC
1 detailsSize & weight
Dimensions
5.7” x 3.75” x 1.85”

Complete your setup

Worth comparing

More from JHS Pedals