Detail 01
Dual effects chains with serial or parallel routing
Lets you build two processing paths and choose how they are connected.
Product detailSKU #1500000437145
Hotone EffectsAmpero II Stomp Amp Modeler & Effects Processor - White
1/12
Independent shopping perspective
The Korena take
Ampero II Stomp is a compact modeling and effects processor for rigs that need more involved routing. Its dual signal chains can run in series or parallel, with a stereo FX loop for connecting external gear. The library includes 400+ effects, 87 amp models, 68 cabinet simulations, 20 Celestion speaker IRs, and third-party IR support. USB-C provides 8-in/8-out audio, reamping, and preset management, so direct recording and patch work can stay within the same system.
Strong match
Who this is for
- Creating serial or parallel signal paths while incorporating external pedals through the stereo FX loop.
- Recording and reamping in a DAW through the 8-in/8-out USB-C audio interface.
- Using detailed patches with up to 12 simultaneous effects modules and three assignable footswitches.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Stereo FX loop
Provides stereo send and return connections for external gear.
Detail 03
20 Celestion speaker IRs plus 50 user IR slots
Starts with onboard speaker IRs and leaves room for third-party files.
Detail 04
Stereo looper with undo/redo, half-speed, and reverse
Adds performance controls to its 60 seconds of stereo loop time.
Final check
Know before you order
- 01Power accepts 9–18V DC center-negative and draws up to 800mA at 9V.
- 02The unit has two 1/4-inch instrument inputs, balanced stereo outputs, MIDI DIN I/O, and one expression/control jack.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can Ampero II Stomp work as a USB recording interface?
Yes. USB-C provides 8-in/8-out audio, reamping, and preset/IR management.
02How many amp and cabinet models are onboard?
It includes 87 amp models and 68 cabinet simulations.
03Does it support third-party IRs?
Yes. It loads 24-bit/44.1kHz WAV IRs up to 2048 samples, with 50 user slots.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Effects Modules
- Up to 12 simultaneous
- Effects
- 400+ total (including 100+ pedal models and 60+ original effects)
1 detailsPickups & controls
- Footswitches
- 3 assignable with halo LEDs
1 detailsBody & build
- Color
- White
6 detailsConnections & power
- Outputs
- 2 x 1/4 inch TRS balanced stereo
- USB
- USB Type-C (8-in/8-out audio interface, reamping, preset/IR management)
- Inputs
- 2 x 1/4 inch instrument inputs
- Input Modes
- Electric, acoustic and line input modes
- Ir Support
- Third-party IR loading supported (24-bit/44.1kHz WAV, up to 2048 samples, 50 user slots)
- Power Supply
- 9–18V DC center negative
4 detailsSize & weight
- Height
- 2.28 inch
- Weight
- 2.32
- Depth
- 5.71 inch
- Width
- 7.28 inch
1 detailsIn the box
- Included Irs
- 20 Celestion speaker IRs
19 detailsOther
- DSP
- Tri-core DSP platform
- Headphone Out
- 1 x 1/8 inch stereo
- Looper
- Stereo, up to 60 seconds (with undo/redo, half-speed, reverse)
- Current Draw
- 800mA max (at 9V)
- Ad Da Conversion
- ESS Sabre series
- Cabinet Simulations
- 68
- Model
- Ampero II Stomp
- Signal Processing
- 24-bit, 44.1kHz
- Exp
- 1 x 1/4 inch TRS (expression/control)
- MIDI I O
- 2 x 5-pin MIDI DIN (In, Out/Thru)
- Drum Machine
- 100 rhythm patterns
- Fx Loop
- 2 x 1/4 inch TRS stereo (send/return)
- Display
- 4 inch 800 x 480 color touchscreen
- Dynamic Range
- Up to 127dB (digital to analog)
- Aux in
- 1 x 1/8 inch stereo
- Product Type
- Amp modeler and multi-effects processor
- Amp Models
- 87
- Presets
- 300 (100 banks x 3 patches)
- Modeling Platform
- CDCM HD and F.I.R.E. modeling system
