Detail 01
Stereo 1/4" TRS to two mono 1/4"
The TRS plug carries two signals on one connector. The split ends become the send to and return from outboard gear.
Product detailSKU #1274034477520
HosaSTP-203 Stereo 1/4" Phone to 2 - Mono 1/4" Phone Insert Cable 9.9 ft.
Independent shopping perspective
The Korena take
A 9.9-foot insert cable: one stereo 1/4" TRS plug splitting to two mono 1/4" plugs. For patching outboard gear into a mixer's insert jack.
Strong match
Who this is for
- Patching a compressor into a mixer channel insert
- Breaking a TRS insert point into send and return
- Studio or live rack where inserts are used regularly
Consider the trade-offs
When to look elsewhere
- Guitar to amp — this is not an instrument cable
- Balanced line runs; the two mono ends are unbalanced
- Consoles with separate send and return jacks per channel
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Insert cable
Purpose-built for mixer insert jacks. Not a stereo headphone extension and not a balanced patch cable.
Detail 03
Two mono ends are unbalanced
Keep runs short and away from power cables; unbalanced connections pick up more hum over distance.
Detail 04
9.9 ft length
Reaches from a console channel strip to a rack a few feet away without excess slack behind the desk.
Detail 05
Black jacket
Vanishes in a dark rack, so label both ends if you patch more than one channel.
Final check
Know before you order
- 01Check your console's insert wiring — tip is send on some desks, return on others
- 02Cable only; the outboard processor and any adapters are separate
- 03If your mixer has separate send and return jacks, you need two standard cables instead
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01What is an insert cable for?
It connects outboard gear, like a compressor or EQ, into a single mixer channel through one TRS insert jack. One plug becomes a send and a return.
02Which mono end is the send?
That depends on your console's insert wiring. Most use tip for send and ring for return, but check the mixer documentation before patching.
03Can I use it as a Y-cable to split a signal?
It will physically connect, but the two ends carry separate send and return paths. Splitting or summing this way gives unpredictable results.
04Can I use this as a guitar cable?
No. The TRS end will not work correctly in a standard instrument input, and this cable is wired for insert send and return, not a single signal path.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
