Detail 01
Screw-in wall mount
Installation uses a screw-in wall-mounting system; two M4 1.75-inch mounting screws are included.
Product detailSKU #1500000278159
HerculesGSP39WB PLUS Auto Grip System Guitar Wall Hanger
Sale
1/8
Independent shopping perspective
The Korena take
Wall storage for guitars and basses that keeps instruments accessible without taking up floor space. The Auto-Swivel AGS yoke turns to suit different headstock shapes, then locks the instrument in place. Standard neck-width coverage runs from 1.57 to 2.05 inches for classical, acoustic, electric, and bass guitars. Install the included N.I.N.A. attachments to accommodate narrower necks down to 1.10 inches, extending use to banjos and mandolins.
Strong match
Who this is for
- Studios, practice rooms, or stage areas needing accessible wall-mounted instrument storage.
- Hanging guitars plus narrower-neck banjos or mandolins using the included N.I.N.A. attachments.
Consider the trade-offs
When to look elsewhere
- Instruments over the 15.4 lb. stated load capacity.
- Instruments with neck widths outside the 1.10–2.05 inch supported range.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
15.4 lb. load capacity
The instrument being hung must not exceed the listed 15.4 lb. capacity.
Detail 03
1 pair of N.I.N.A. adapters
The included adapters enable the 1.10-inch minimum narrow-neck compatibility.
Final check
Know before you order
- 01Measure the instrument neck width before installation.
- 02Plan for a screw-in wall installation.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Which neck widths does it support?
It supports 1.57–2.05 inch neck widths, or down to 1.10 inches when the N.I.N.A. attachments are installed.
02Can it hold a banjo or mandolin?
Yes. The included N.I.N.A. attachments make it suitable for banjos and mandolins with necks as narrow as 1.10 inches.
03What is the maximum load capacity?
The stated load capacity is 15.4 lb.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Narrow neck compatibility
- 1.10" minimum with N.I.N.A.
1 detailsSize & weight
- Arm length
- 4.1"
13 detailsOther
- Category Source
- detail
- N.I.N.A. adapters
- 1 pair
- Product type
- Guitar wall hanger
- Korena Special
- false
- Yoke type
- Auto-Swivel AGS
- Load capacity
- 15.4 lb.
- Neck compatibility
- 1.57"–2.05"
- Product Type
- Guitar wall hanger
- Tier
- new
- Model
- GSP39WB PLUS
- Mounting screws
- 2 x M4 1.75"
- Mounting type
- Screw-in wall mount
- Source Id
- site51500000278159
Worth comparing
1 of 12
