Detail 01
25–34.4 inch height range
Adjusts to bari necks of different lengths, and lets you set it low for seated playing or high for standing.
Product detailSKU #1273887992606
HerculesDS536B Adjustable Baritone Sax Stand With Alto/Tenor Peg
Independent shopping perspective
The Korena take
A floor stand for baritone sax with a second peg for alto or tenor. For doublers who need two horns parked at once.
Strong match
Who this is for
- Bari players who also switch to alto or tenor mid-set
- Pit and big-band chairs parking two horns between charts
- Practice rooms where a bari lives out of its case
Consider the trade-offs
When to look elsewhere
- Single-horn alto or tenor players — smaller stands cost far less
- Players hauling gear on foot; 5.4 lb and 19.7 inches folded
- Anyone needing soprano, clarinet or flute support
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
5.4 lb
Heavy for a stand, which is what keeps a baritone sax from tipping it. Not a stand you carry casually.
Detail 03
19.7 x 6.9 inch folded
Collapses to roughly a music-stand bag size. It will not fit inside a sax case.
Detail 04
Alto/tenor peg included
One stand covers a doubling setup, so you are not buying and carrying a second stand.
Detail 05
Baritone-specific frame
Sized around a bari's bow and bell. A general sax stand rated for tenor will not hold this weight safely.
Final check
Know before you order
- 01Confirm your bari's bow clears the yoke; low-A and low-Bb horns differ in depth
- 02The alto/tenor peg is the only extra peg; flute and clarinet pegs are separate
- 03Set height before loading the horn, not after
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this hold a tenor sax on its own?
The main cradle is built for baritone. A tenor goes on the included side peg, so you can stand a tenor here, but the main position is sized for a bari.
02How tall does it go?
25 to 34.4 inches, adjustable across that range.
03Does it fit in a sax case?
No. Folded it is 19.7 by 6.9 inches, too large for an instrument case. Plan on carrying it separately.
04How heavy is it?
5.4 pounds. That mass is deliberate — a baritone sitting up high needs a base that will not walk or tip.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSize & weight
- Weight
- 5.4
- Height
- 25–34.4 inch (645–875 mm)
1 detailsOther
- Folded Size
- 19.7 x 6.9 inch (500 x 175 mm)
