Detail 01
10 inputs / 14 outputs
The installed Dante interface provides ten inputs and fourteen outputs.
Product detailSKU #1500000460295
HarrisonD510r 10-Slot 500 Series Rack System with Dante Interface Card
1/9
Independent shopping perspective
The Korena take
The D510r with Dante interface card is a 10-slot 500 Series rack for modular processing with networked audio connections built into the configuration. Its Dante interface provides 10 inputs and 14 outputs, primary and secondary RJ45 ports, and BNC TTL wordclock. Ten slots are available for your chosen 500 Series modules, with an optional D510mx card available when analog summing is part of the plan. The steel 3RU chassis and 170mA-per-slot power supply suit rack-based studio and live workflows.
Strong match
Who this is for
- Integrating ten 500 Series module slots with Dante-connected studio or live-sound routing.
- Building a rack-based processing system where wordclock and redundant-style primary/secondary network ports are required.
- Using a 3RU, standard-width rack system for modular audio processing.
Consider the trade-offs
When to look elsewhere
- Analog summing configurations without adding the optional D510mx mixer card.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
0.9ms at 48kHz / 0.45ms at 96kHz
Specified interface latency changes with the operating rate.
Detail 03
Two RJ45 ports
Primary and secondary network connections are provided.
Detail 04
170mA per slot
The built-in power supply delivers 170mA to each module slot.
Final check
Know before you order
- 01Allow 3RU of rack height and 7.2 inches of depth.
- 02The D510mx analog summing mixer is optional.
- 03USB and ADAT interface expansion is described as in development.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is the Dante interface included in this configuration?
Yes. This D510r configuration includes a Dante interface card.
02How many module slots does it have?
It is a 10-slot 500 Series rack.
03What network connections are provided?
It has two RJ45 ports, identified as Primary and Secondary, plus a BNC TTL wordclock connection.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20 Hz – 20 kHz +/- 0.25 dB
4 detailsConnections & power
- Power per Slot
- 170mA
- Network Ports
- 2 x RJ45 (Primary and Secondary)
- Built in Power Supply
- 30% more power per module than standard 500 Series specification
- Power Input
- 50/60Hz / 80-246VAC / 1.8-0.55A
4 detailsSize & weight
- Noise A Weighted
- ADC less than -95 dBu / DAC less than -85 dBu
- Weight
- 10.4
- Depth
- 7.2 inch
- Height
- 3RU (5.25 inch)
9 detailsOther
- Dac Thd N
- Less than 0.006% at 1kHz 18dBu
- Latency
- 0.9ms at 48kHz / 0.45ms at 96kHz
- Future Expansion
- USB and ADAT interface card in development
- Other Connections
- BNC TTL Wordclock
- Slots
- 10-slot 500 Series rack
- Rack Size
- Standard 19 inch width
- Enclosure
- Rugged steel for touring and studio durability
- Optional Interface
- Dante AoIP card for Audio over IP
- Adc Thd N
- Less than 0.0008% at 1kHz 24dBu
