Detail 01
24-bit digital effects
Effects parameters can be customized at the mixer.
Product detailSKU #1413918385954
HarbingerLP9800 Powered Mixer
Sale
1/4
Independent shopping perspective
The Korena take
Built to mix a complete band at rehearsals, jams, and gigs, Harbinger’s red LP9800 is a 14-channel powered mixer with 800 watts. It has nine XLR mic inputs plus 14 total line inputs, giving one console a stated capacity for a full band. The internal amp can be configured for stereo operation, for separate mains and monitors, or as a mono bridge amp. Added processing and EQ controls make on-the-spot adjustments part of its performance-focused workflow.
Strong match
Who this is for
- Running band rehearsals or gigs with microphones, line sources, separate mains, and monitors.
- Adjusting dual graphic EQs in a dark club using their LED setting indicators.
- Routing the mix onward to powered speakers through the LP9800’s line outputs.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Dual 9-band graphic EQs
Two EQ sections include LED markers so settings remain visible in a dark club.
Detail 03
Frequency response: 20 Hz–20 kHz (±0.5 dB)
The stated response specification covers 20 Hz through 20 kHz, with up to ±0.5 dB variation.
Final check
Know before you order
- 01Map microphones and line sources against the nine XLR mic inputs and 14 total line inputs.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can the LP9800 connect to powered speakers?
Yes. Its line outputs allow connections to powered speakers.
02Can its amplifier run in mono?
Yes. A switch changes it into a mono bridge amp.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Frequency Response
- 20Hz–20KHz (±0.5dB)
1 detailsBody & build
- Color
- Red
5 detailsConnections & power
- Microphone Inputs
- –60dBu
- All Other Outputs
- 100 ohm
- Microphone Input
- 2.2 kohm balanced/1.1 kohm unbalanced
- Line Inputs
- –50dBu
- All Other Inputs
- 47 kohm unbalanced
2 detailsOther
- Tape Out
- 120 ohm
- Gain
- 24dB
