Detail 01
1-11/16" nut width
Must match your neck. A different width leaves the E strings hanging off or crowded inward.
Product detailSKU #1274115045918
Graph TechTUSQ Tacoma Slotted Acoustic Guitar Nut Ivory 1 11/16"
Independent shopping perspective
The Korena take
Slotted TUSQ nut for Tacoma-style acoustics, 1-11/16" wide. For players replacing a worn or badly cut nut on a compatible neck.
Strong match
Who this is for
- Replacing a chipped, worn, or buzzing original nut
- Acoustics with a 1-11/16" nut width and Tacoma-profile slot
- Players wanting consistent string spacing without hand-slotting from scratch
Consider the trade-offs
When to look elsewhere
- Necks wider or narrower than 1-11/16" without heavy reshaping
- Players unwilling to remove and glue in a nut
- Anyone needing a compensated or zero-fret setup
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Pre-slotted
String slots are already cut, so you skip nut files. Depth still usually needs final adjustment.
Detail 03
1-7/16" E-to-E spacing
Distance between the outer strings. Sets how close the low and high E sit to the fretboard edges.
Detail 04
TUSQ material
A hard synthetic, denser and more uniform than bone, so string-to-string volume stays even.
Detail 05
Ivory color
Matches traditional bone and factory nuts. Won't stand out against a natural or sunburst headstock.
Final check
Know before you order
- 01Measure your existing nut width and slot before ordering
- 02Removal usually needs a light tap and glue cleanup, plus fresh strings
- 03Slot depth often needs filing down for low action
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will this fit my acoustic?
It fits necks with a 1-11/16" nut width and a matching slotted seat. Measure your current nut end to end before ordering.
02Do I need to file the slots?
The slots are pre-cut, but final depth depends on your neck relief and desired action. Most installs need some filing to avoid high action at the first fret.
03Is it glued in?
A nut is seated in its slot with a small amount of glue. Use very little so it can be removed later.
04How is TUSQ different from bone?
TUSQ is a synthetic with consistent density throughout. Bone varies piece to piece, with soft spots that can cause uneven string-to-string output.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color Finish
- White
1 detailsOther
- E to E Spacing
- 1-7/16
