Detail 01
Two channels with independent controls
You can keep separate control settings for each channel.
Product detailSKU #1500000419492
GibsonDual Falcon 20 2x10 Tube Guitar Combo Amplifier Cream Bronco
aggressivehigh outputbluescountry
1/8
Independent shopping perspective
The Korena take
Built around two independently controlled channels, the Dual Falcon 20 gives a guitarist separate places to set up clean and driven sounds. Its selectable 15W, 6W, and 2W operating levels make the same amp practical across lower-volume sessions and louder playing. Tube-driven reverb and tremolo are switchable from the included three-button footswitch, while the buffered series loop leaves room for pedal-based effects. Two Jensen Blackbird 40 Alnico 10-inch speakers complete the all-tube combo format.
Strong match
Who this is for
- Players who need footswitch access to channel selection, reverb, and tremolo during a set.
- Guitar rigs that use a buffered series effects loop for external pedals.
- Moving between approximately 2W, 6W, and 15W power settings for different playing volumes.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
2x 10-inch Jensen Blackbird 40 Alnico speakers
The combo uses a pair of 10-inch speakers rather than a single-speaker layout.
Detail 03
Cathode-biased, maintenance-free power section
The amplifier's biasing is identified as maintenance-free.
Detail 04
Slave monitor output
A fixed, attenuated output is taken from the speaker output.
Final check
Know before you order
- 01The supplied footswitch controls Channel 1/2, reverb, and tremolo.
- 02The amp includes a slipcover.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I switch channels, reverb, and tremolo remotely?
Yes. A three-button footswitch is included for Channel 1/2 selection, reverb, and tremolo.
02What power settings are available?
With its 6L6 configuration, it offers approximately 15W, 6W, and 2W settings.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsPickups & controls
- Footswitch
- 3-button included (Channel 1/2, Reverb, Tremolo)
26 detailsOther
- Origin
- Handcrafted in Petaluma, California
- Chassis
- Aluminum
- Global Tremolo
- Depth & Frequency (Speed) controls
- Full Power
- Approximately 15 watts (2x 6L6 push-pull, Class A, Pentode)
- Effects Loop
- Buffered, series
- Channels
- Two, with independent controls
- Accessories
- Slipcover included
- Tier
- new
- Low Power
- Approximately 2 watts (1x 6L6 single-ended, Class A, Pentode)
- Monitor Output
- Slave output, fixed attenuated from speaker output
- Control Faceplate
- Polished stainless steel
- Amplifier Type
- All-tube
- Inputs
- Normal or Low (Cleaner)
- Preamp Tubes
- 4x 12AX7
- Half Power
- Approximately 6 watts (2x 6L6 push-pull, Class A, Triode)
- Category Source
- detail
- Power Class
- Pure Class A
- Speakers
- 2x 10" Jensen Blackbird 40 Alnico
- Korena Special
- false
- Dimensions (WxHxD)
- 21.75" (55.24 cm) x 19" (48.26 cm) x 8.88" (22.54 cm)
- Weight
- 39.45 lbs (17.89 kg)
- Reverb and Tremolo
- Tube-driven, footswitchable
- With Optional 6V6 Power Tubes
- Approximately 12 watts, 5 watts, 1 watt respectively
- Power Tubes
- 2x 6L6 (optional 2x 6V6)
- Source Id
- site51500000419492
- Biasing
- Cathode biased, maintenance-free
Complete your setup
Worth comparing
1 of 12
