Korena
Product detailSKU #1273887992716

GibraltarSC-700HA Tom Arm

Gibraltar
Gibraltar SC-700HA Tom Arm
1/2

Independent shopping perspective

The Korena take

Gibraltar SC-700HA tom arm. A replacement or add-on arm for mounting a rack tom off a stand, rack, or existing holder.

Gibraltar SC-700HA Tom Arm product detail
Product studyGibraltar SC-700HA Tom Arm

Strong match

Who this is for

  • Swapping out a bent or seized tom arm
  • Adding a tom position to a rack setup
  • Keeping a spare arm in the hardware case

Consider the trade-offs

When to look elsewhere

  • Drummers needing the drum-side mount block too
  • Holders bored for a different arm diameter
  • Anyone wanting a complete stand rather than a part

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

Tom arm, sold as a part

It's the tube that positions the tom. The clamp on your stand and the mount on the drum are separate pieces.

Detail 02

Diameter must match your receiver

Drum hardware isn't universal. An arm that's undersized slips under load; oversized won't enter the clamp at all.

Detail 03

Gibraltar hardware line

Matched to Gibraltar clamps and racks, so it's the low-risk choice if your existing hardware is Gibraltar.

Detail 04

Single tom capacity

One arm, one drum. A second tom needs a second arm or a double-tom holder.

Detail 05

Entry-level price tier

A serviceable replacement part rather than heavy-gauge hardware. Fine for a rack tom, not for hanging weight far off-axis.

Final check

Know before you order

  1. 01Measure your holder's bore first — diameters vary between brands and eras
  2. 02Drum-side mount block and clamp are not included
  3. 03Tighten memory or set screws fully; a loose arm creeps under playing

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Will this fit my existing tom holder?

Only if the bore matches. Pull the old arm and measure it, or measure the clamp opening, before ordering.

02Is the clamp included?

No. This is the arm. You need a clamp on the stand or rack to hold it, plus the mount on the drum itself.

03How is this different from an extension arm?

A tom arm positions a drum. An extension arm just adds reach to hardware you already have.

04Can I use it with another brand's rack?

Yes, if the diameters match your clamps. It's designed around Gibraltar sizing, so verify before you buy.