Detail 01
14 inch
Matches the drum's shell diameter, not the depth. A 14x12 and 14x14 tom use the same hoop.
Product detailSKU #1273887992696
GibraltarChrome Tom Drum Hoop 14 in. 6-Lug
Independent shopping perspective
The Korena take
A chrome replacement hoop for a 14 inch tom with six lugs. Buy it to replace a bent, rusted, or mismatched hoop.
Strong match
Who this is for
- Replacing a hoop bent by a dropped drum or stick
- Restoring an older tom with pitted or rusted hardware
- Matching hoop finish across a kit
Consider the trade-offs
When to look elsewhere
- Snare drums, which need a snare-side hoop
- Toms with a lug count other than six
- Anyone wanting a tone change — this is a repair part
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
6-lug
Six holes at fixed spacing. An 8-lug tom will not line up, even at the same diameter.
Detail 03
Chrome finish
Bright plating that matches most standard kit hardware and wipes clean of stick marks.
Detail 04
Tom hoop
Cut for a tom, so it clears standard tom lugs and mounts rather than snare throw-off hardware.
Detail 05
Single hoop
One hoop per order. A full drum needs two if you are replacing both batter and resonant sides.
Final check
Know before you order
- 01Count your lugs and measure the shell — six lugs and 14 inches both matter
- 02Tension rods and washers are not included
- 03You will need to detune, swap, and retune the head
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Is this one hoop or a pair?
One. If you are redoing both the batter and resonant sides of a tom, you need two.
02Will it fit a 14 inch snare?
No. Snare drums need a hoop cut for the throw-off and snare bed, and most use more than six lugs.
03Does it come with tension rods?
No. Reuse your existing rods and washers, or buy them separately if the old ones are stripped or rusted.
04How do I know if I have six lugs?
Count the lug casings around one side of the shell. Six evenly spaced casings means six tension rods per head.
