Detail 01
16HP panel width
Specifies the module’s horizontal Eurorack rack width.
Product detailSKU #1500000324571
Gamechanger AudioPlasma Eurorack Distortion Module Black
1/4
Independent shopping perspective
The Korena take
Plasma Drive brings Gamechanger Audio’s high-voltage xenon-tube distortion process to Eurorack. It boosts incoming audio to 3000V, creates continuous electrical discharges, and converts that activity back into analog audio for quick, responsive, extremely heavy distortion. Alongside CV control over distortion level and dry/wet mix, tracking oscillators add Octave Up and Two-Octave Down functions. Those oscillators can be enabled from the panel or switched with trigger signals, making the module suited to voltage-controlled modular patches.
Strong match
Who this is for
- Modular patches where CV needs to control distortion amount or the dry/wet mix.
- Patches using trigger signals to switch the tracking oscillators on and off.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
50 mm module depth
Specifies the module’s depth.
Detail 03
CV input level: -10V to +10V
Defines the accepted external control-voltage range.
Detail 04
Low-frequency EQ: ±9dB at 600Hz
Provides low-frequency boost and cut centered at 600Hz.
Detail 05
High-frequency EQ: ±10dB at 1.5kHz
Provides high-frequency boost and cut centered at 1.5kHz.
Final check
Know before you order
- 01Confirm an available conventional Eurorack PSU ribbon-cable power connection.
- 02Check supply capacity for peak consumption of 200mA at +12V and 100mA at -12V.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Which parameters accept CV control?
CV control is provided for distortion level and dry/wet mix.
02What do the tracking oscillators add?
They add Octave Up and Two-Octave Down functions, introducing more harmonics to the original signal.
03How are the tracking oscillators switched?
They can be switched manually or with trigger signals.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Color
- Black
3 detailsConnections & power
- Audio Input Level
- up to 20V ptp
- Peak Power Consumption
- 200mA@+12V, 100mA@-12V
- Cv Input Level
- -10V – +10V
2 detailsSize & weight
- Module Depth
- 50 mm
- Panel Width
- 16HP
2 detailsOther
- EQ Hi Freq Boost Cut
- ±10dB, 1.5kHz corner freq.
- EQ Low Freq Boost Cut
- ±9dB, 600Hz corner freq.
