Detail 01
10 footswitch/encoders with LCD scribble strips
Controls and their labels are available directly from the floorboard.
Product detailSKU #1500000407760
FenderTone Master Pro Multi-Effects Guitar Pedal - Black
bluespopmetalthrashrockshred
1/8
Independent shopping perspective
The Korena take
Fender’s Tone Master Pro is a floor-based guitar multi-effects unit built around more than 100 amp and effect models. It combines Fender tube-amp recreations with the licensed EVH 5150 Stealth model, then lets you shape the cabinet side with onboard impulse responses or third-party IR files. Ten footswitch/encoders with LCD scribble strips put preset and effect control underfoot, while the broad I/O supports routing through balanced outputs, loops, MIDI, auxiliary input, and headphones.
Strong match
Who this is for
- Building programmable guitar sounds around Fender amp models and the licensed EVH 5150 Stealth model.
- Live or recording rigs that need balanced stereo outputs, MIDI, effect loops, and headphone monitoring.
- Players who want to load third-party cabinet IR files alongside Fender-captured impulse responses.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Four effect loops
Loops 1 and 2 are mono unbalanced; loops 3 and 4 are balanced and can form a stereo pair.
Detail 03
Configurable instrument-input impedance
The 1/4-inch instrument input offers 1 Mohm, 330 kohms, or 22 kohms settings.
Detail 04
Dual 5-pin MIDI
MIDI provides in, out, through, and merge connections.
Detail 05
USB-C and Bluetooth
Both connection types are built into the unit.
Final check
Know before you order
- 01The unit requires 100–220 VAC power at 50/60Hz and uses an IEC power cable.
- 02Check your routing needs: the four loops use different mono and balanced connection formats.
- 03The XLR combo input supplies +48 VDC phantom power on XLR only.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I use my own cabinet impulse responses?
Yes. The Tone Master Pro supports third-party IR files as well as Fender-captured cabinet impulse responses.
02Does it have balanced outputs?
Yes. It has balanced XLR stereo outputs and balanced 1/4-inch TRS stereo output pairs.
03Can I connect an expression pedal?
Yes. It provides two 1/4-inch expression-pedal connections.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsSound
- Digital audio frequency response
- 20Hz–20kHz (+0.1/-0.7dB)
7 detailsConnections & power
- Input voltage range
- 100–220 VAC, 50/60Hz
- AUX input
- 3.5 mm stereo; impedance: 10 kohm; max input level: 2.4V
- Supported sample rates
- 48kHz internal (project sync 44.1/48/88.2/96kHz)
- Phantom power
- +48 VDC (XLR only)
- Headphone output
- 1/4" TRS stereo, unbalanced; maximum output: 110mW x2; impedance working range: 33 ohms x2 (16 ohms x2 minimum)
- Line input
- 1/4" TRS female (combo), balanced; maximum level: 7.8V balanced, 4.5V unbalanced; impedance: 1Mohm
- Microphone input
- XLR female (combo), balanced; impedance: 1.8 kohms balanced; preamp maximum input level: 4.7V
1 detailsSize & weight
- Digital audio bit depth
- 32-bit
18 detailsOther
- MIDI
- Dual 5-pin DIN (in/out-through-merge)
- Tier
- new
- Controls
- Navigation Control, Master Volume Control, 10 Footswitch/Encoderswith LCD "Scribble Strips"
- Power requirements
- 40W
- XLR
- XLR male, balanced (stereo pair); line outputs: 1/4" TRS female, balanced (stereo pairs output 1 and 2)
- Dimensions (HxWxD)
- 3.8" (96.4 mm) x 14.6” (37.1 cm) x 10.3” (26.16 cm)
- Category Source
- detail
- Other connections
- 1/4" expression pedal 1 and 2, amp control
- Korena Special
- false
- Weight
- 8.8 lb. (4 kg)
- Effect loop (4 total)
- Mono loops (1 and 2) 1/4" unbalanced, mono loops (3 and 4) 1/4" TRS balanced (can be combined into stereo pair)
- Maximum level
- 5.6V (2.8V with input pad off)
- Connectivity
- USB-C, Bluetooth
- Power cable
- IEC
- Output 1
- 200 ohms (line), 290 ohms balanced, 400 ohms unbalanced (instrument); Output 2: 170 ohms
- Source Id
- site51500000407760
- Impedance
- 10 kohms
- Instrument Input
- 1/4"; impedance: 1 mohms, 330 kohms, 22 kohms configurable unbalanced
Complete your setup
Worth comparing
1 of 12
More from Fender
1 of 8
