Korena
Product detailSKU #1273888004157

FenderPre-Amp Mid Boost Kit 25 DB

Fender logo
Sale
Fender Pre-Amp Mid Boost Kit 25 DB

Independent shopping perspective

The Korena take

A Fender preamp kit that adds 25 dB of midrange boost to a passive guitar. For players who want a hotter, midrange-forward voice on tap.

Fender Pre-Amp Mid Boost Kit 25 DB product detail
Product studyFender Pre-Amp Mid Boost Kit 25 DB

Strong match

Who this is for

  • Adding a boost circuit to a passive Strat-style guitar
  • Pushing an amp into more gain without a pedal
  • Players who want a thicker lead tone from a single-coil guitar

Consider the trade-offs

When to look elsewhere

  • Anyone unwilling to solder or pay a tech
  • Players who want their guitar to stay fully passive
  • Guitars with no room in the control cavity

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Detail 01

25 dB of boost

A large amount — enough to slam the front of an amp into overdrive, not a subtle level trim.

Detail 02

Mid boost, not flat boost

Pushes the midrange specifically, so single coils get thicker and cut through a band mix rather than just getting louder.

Detail 03

Preamp circuit

Active electronics inside the guitar. The circuit needs a battery, so the guitar stops being purely passive.

Detail 04

Sold as a kit

Components to be installed, not a finished pickguard assembly. Expect wiring work to get it into the guitar.

Final check

Know before you order

  1. 01Requires soldering and cavity space — budget for a tech if you don't wire guitars
  2. 02A battery compartment or cavity room for a battery is needed
  3. 03One of your existing controls gets reassigned to the boost

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Do I need a battery?

Yes. It is an active preamp circuit, so it draws power. Plan where the battery will live before you start — many bodies need routing or a rear cover.

02Will this work on any guitar?

It needs enough control cavity space and a spare pot position. Tight Strat-style cavities and thinline bodies are the usual problem.

03Does it change my tone with the boost off?

The circuit sits in the signal path once installed, so the guitar is no longer a purely passive instrument even at minimum.

04Can I install it myself?

Only if you are comfortable soldering pots and shielded wire in a cramped cavity. Otherwise a tech install is the safer route.

Worth comparing

More from Fender