Detail 01
Corner hardware, not the amp
These bolt to the cabinet's outer corners and take the impact instead of the wood and covering.
Product detailSKU #1273888003977
FenderAmp Cabinet Corners
Independent shopping perspective
The Korena take
Metal corner protectors for amp and speaker cabinets. For anyone building or repairing a cab that gets loaded in and out of vehicles.
Strong match
Who this is for
- Gigging players whose cab corners are already chewed up
- DIY amp cabinet builds needing edge protection
- Refinishing a vintage-style cab and replacing worn hardware
Consider the trade-offs
When to look elsewhere
- Anyone wanting a cosmetic-only upgrade on a cab that stays home
- Players unwilling to drill and screw into their cabinet
- Combo amps with molded plastic corners already in place
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Fender-spec parts
Sized for Fender cabinet corner radii. Other brands may need different screw spacing or a different corner profile.
Detail 03
Price point around ten dollars
This is a small parts purchase. Check the quantity before assuming it covers all eight corners of a cab.
Detail 04
Screw-mounted
Installation means pilot holes and screws through the tolex into the cabinet frame. Permanent once fitted.
Final check
Know before you order
- 01Confirm how many corners come in the pack against the eight a cab needs
- 02Screws may not be included — check before you start the job
- 03Measure your existing corner radius; a mismatch will not sit flush
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit a non-Fender amp cabinet?
They are cut to Fender cabinet dimensions. Many cabs use similar corner geometry, but measure your corner radius and screw spacing before ordering.
02Do I need tools to install these?
Yes. You will need a drill for pilot holes and a screwdriver. Working on tolex requires care to avoid tearing the covering around the corner.
03How many corners do I need for one cabinet?
A standard rectangular cabinet uses eight — four on the front face, four on the back.
04Will this damage my cabinet if I remove them later?
Yes. Screw holes stay in the frame and the tolex under the corner will show wear. Treat this as a permanent modification.
