Detail 01
Sold as a pair
Covers both the heel and horn button, so the pair matches instead of one shiny and one aged.
Product detailSKU #1273888004156
FenderAmerican Standard Strap Buttons (2)
Independent shopping perspective
The Korena take
A pair of replacement strap buttons in Fender's standard style. For fixing a stripped or missing button on a guitar or bass, not for strap locks.
Strong match
Who this is for
- Replacing a button that fell off or lost its screw
- Matching hardware color after a pickguard or bridge swap
- Keeping a spare pair in a gig bag
Consider the trade-offs
When to look elsewhere
- Players whose strap slips off — these are not strap locks
- Anyone with a stripped screw hole that needs plugging first
- Guitars using an aftermarket locking system already
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Fender American Standard style
Sized for Fender-drilled bodies, so the existing screw hole usually lines up without redrilling.
Detail 03
Screw-mount design
Installs with a hand screwdriver in a couple of minutes. No soldering or wiring involved.
Final check
Know before you order
- 01Check whether the button or the screw failed — a stripped hole needs a wood plug
- 02Confirm the finish matches your other hardware before installing
- 03Felt or leather washers are worth adding if yours are gone
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Will these fit a non-Fender guitar?
Usually, since most makers use similar screw sizes, but check your existing screw diameter and hole depth first. A slightly different screw gauge can loosen in the old hole.
02Do these lock the strap on?
No. They are standard buttons. A strap that slips will still slip — you want a locking system or rubber washers for that.
03Do they come with screws?
Reuse your original screws if they are in good shape; they thread into the existing hole with the correct bite.
04How hard is the install?
One screwdriver, a few minutes. The risk is overtightening and stripping the wood, so stop as soon as the button seats flush.
