Korena
Product detailSKU #1500000330674

FenderAcoustic Junior 100W 1x8 Acoustic Guitar Combo Amplifier Dark Brown Vinyl

Fender logo
Fender Acoustic Junior 100W 1x8 Acoustic Guitar Combo Amplifier Dark Brown Vinyl
1/4

Independent shopping perspective

The Korena take

Fender's Acoustic Junior is a 100W acoustic combo with a single 8-inch low-frequency driver and hi-fi compression tweeter. Two independent channels provide separate volume, low, mid, high, effects, and phase controls, allowing an instrument and microphone to be handled with their own settings. Each channel offers eight effects choices. Bluetooth streaming, USB recording, and a 60-second onboard looper extend it beyond straightforward amplification, while selectable XLR output routing and a headphone output support different monitoring and output needs.

Fender Acoustic Junior 100W 1x8 Acoustic Guitar Combo Amplifier Dark Brown Vinyl product detail
Product studyFender Acoustic Junior 100W 1x8 Acoustic Guitar Combo Amplifier Dark Brown Vinyl
Fender Acoustic Junior 100W 1x8 Acoustic Guitar Combo Amplifier Dark Brown Vinyl alternate view
Alternate view

Strong match

Who this is for

  • Acoustic guitar and vocal setups needing separate channel EQ, effects, and phase controls.
  • Solo practice or performance built around a 60-second onboard loop and Bluetooth backing audio.
  • Recording via the USB jack or sending channel output through the selectable XLR line outputs.

Consider the trade-offs

When to look elsewhere

  • Players who require the MGT-4 effects and looper footswitch as part of the purchase.

What matters in use

The specifications, translated

Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.

Fender Acoustic Junior 100W 1x8 Acoustic Guitar Combo Amplifier Dark Brown Vinyl construction detail

Detail 01

Two independent channels

Each channel has its own volume, three-band EQ, effects level, effects selection, and phase switch.

Detail 02

60-second looper

Onboard Record/Dub, Play/Stop, and Undo controls manage loops; an optional footswitch can also control it.

Detail 03

Outputs

Two XLR line outputs can be set for channels 1 and 2, stereo/mono, and combined or separate routing.

Detail 04

Effects

Each channel offers Room Reverb, Hall Reverb, Echo, Delay, Chorus, Vibratone, Delay + Chorus, and Delay + Reverb.

Final check

Know before you order

  1. 01The 4-button MGT-4 footswitch is sold separately.
  2. 02The amp uses an IEC power cable.

Product questions

Before you decide

Straight answers to the questions shoppers most often ask about this product.

01Can it run an instrument and microphone separately?

Yes. It has two independent channels, each with separate level, EQ, effects, and phase controls.

02How long is the onboard looper?

It records up to 60 seconds.

03Can it stream backing tracks wirelessly?

Yes. Bluetooth pairing streams audio from phones and tablets.

04Does it have XLR outputs?

Yes. It has two selectable XLR line outputs.

Reference

Full specifications

The complete catalog record, organized around the decisions musicians make when comparing gear.

3 detailsSound
Effects
Each channel has Room Reverb, Hall Reverb, Echo, Delay, Chorus, Vibratone, Delay + Chorus and Delay + Reverb
Speaker
One: 8 inch cloth-surround low-frequency driver
Power
100W
4 detailsPickups & controls
Footswitch
4-Button MGT-4: Effects Select, Looper Control, Tap and Tuner (use with included magnetic overlay label), (sold separately)
Control Panel
Channels 1 and 2: Volume, Low EQ, Mid EQ, High EQ, Effects Level, Effects Select, Phase Switch (separate controls for each channel); looper controls: rec/dub, play/stop, undo; Bluetooth pair button
Rear Controls
Power, Mono/Stereo Select, Ground Lift, Channels 1 and 2 Combined/Separate Output Select, Reset, Firmware Update
Control Knobs
Black lightly texture plastic with easy-to-read white indicators
2 detailsBody & build
Color
Brown
Cabinet Material
Lightweight plywood
4 detailsConnections & power
Outputs
Two XLR line outputs selectable for channel 1/2, stereo/mono and ground lift; one 1/8 inch stereo headphone output
Inputs
Two balanced 1/4 inch–XLR combination, one AUX 1/8 inch stereo
Power Cable
IEC
Connectivity
Bluetooth pairing for audio streaming from phones and tablets. USB jack for recording
4 detailsOther
Covering
Dark brown textured vinyl
Grille Cloth
Dark brown woven cloth with embroidered logo
Looper
60 seconds with onboard Record/Dub, Play/Stop and Undo Buttons; can also be controlled by optional footswitch (sold separately)
Tweeter
One: Hi-fi compression tweeter

Worth comparing

More from Fender