Detail 01
30 strands
The common middle count. More strands than 20, fewer than 42, so response stays even across the head.

Independent shopping perspective
Replacement snare wires for a 14-inch snare drum. 30 strands, budget priced. Buy it when your current wires are bent, broken, or dead.

Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
The common middle count. More strands than 20, fewer than 42, so response stays even across the head.
Detail 02
Sized for a 14 in. snare, the standard diameter. Strand length must match the drum or it will not tension evenly.
Detail 03
Cheap enough to replace on schedule rather than nursing bent strands along.
Detail 04
These sit under the bottom head and create the buzz. A dead sound is often wires, not heads.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
Yes, these are cut for a 14 in. snare drum, which is the standard diameter on most kits. They will not fit 13 in. or piccolo-width drums.
Individual strands are broken or bent out of line, the drum buzzes unevenly, or you cannot get a clean crack no matter how you adjust the throw-off tension.
Different, not better. 30 gives a fuller, more sustained buzz and even response. Lower counts sound drier and more focused; higher counts are more sensitive at low volume.
A screwdriver for the throw-off and butt-plate clamps, and something to trim cord or straps to length. No drum key required for the wires themselves.