Detail 01
Up to 65 dB clean gain
Provides the microphone gain range described for integrating dynamic, ribbon, and condenser microphones.
Product detailSKU #1390836361447
EventideMixingLink Mic Pre With FX Loop
Independent shopping perspective
The Korena take
MixingLink brings microphone, instrument, and line-level sources into a pedal-based effects setup. Its mic preamp provides up to 65 dB of gain, with switchable phantom power for condenser microphones, while the FX loop handles balanced or unbalanced connections. Send the result to an amplifier, a mixer or recording interface through the XLR DI, or monitor on headphones. A mix control lets you balance dry microphone signal against processed effects.
Strong match
Who this is for
- Routing vocals or acoustic instruments through a pedalboard for rehearsal, performance, or recording.
- Sending a processed signal directly to a mixer or recording interface through the balanced XLR DI.
- Monitoring a pedalboard-based microphone setup on headphones during recording or silent practice.
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Switchable phantom power
Allows condenser microphones to be used directly with the unit.
Detail 03
Balanced/unbalanced FX loop
The loop can connect balanced or unbalanced effects and studio equipment.
Detail 04
9V DC, 500 mA, center negative
Power supply requirement.
Final check
Know before you order
- 01Use a 9V DC, 500 mA center-negative power supply.
- 02Choose the appropriate balanced or unbalanced connection for the FX loop.
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I run a microphone through pedal effects?
Yes. The built-in mic preamp raises microphone signal for processing through the FX loop and pedals.
02Can it connect directly to a mixer?
Yes. Its balanced XLR DI output can feed a mixer or recording interface.
03Does MixingLink support condenser microphones?
Yes. It has switchable phantom power for condenser microphones.
04Can I feed a guitar amplifier?
Yes. A dedicated amp output is provided for a traditional guitar amplifier.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
2 detailsSound
- Fx Return Impedance
- 200 kOhm
- Fx Send Impedance
- 400 Ohm
10 detailsConnections & power
- Aux Output Level
- 18 mV
- XLR Line Input Impedance
- 22 kOhm
- XLR Mic Input Impedance
- 2 kOhm
- DI Output Level
- -10 dBu DI, +18 dBu line
- Aux Input Impedance
- 5 kOhm
- Amp Output Impedance
- 250 Ohm
- Power Supply Rating
- 9V DC 500 mA center negative
- Power Requirement
- 9V DC
- Instrument Input Impedance
- 500 kOhm
- Headphone Output Power
- 150 mW per channel
3 detailsOther
- Current Draw
- 200 mA minimum
- Product Type
- Mic preamp and FX loop pedal
- Model
- MixingLink
