Detail 01
Resonant head
Front side only. It shapes sustain and projection; the batter side is what you actually strike.
Product detailSKU #1274034479426
EvansOnyx Resonant Bass Drum Head 24 in.
1/3
Independent shopping perspective
The Korena take
24 in. resonant front head for a bass drum, with a dark finish and an offset hole. For players replacing a front head on a large kick.
Strong match
Who this is for
- Large-format kits where the front head is worn or unported
- Miking a kick without pulling the front head off entirely
- Matching a darker-looking kit front
Consider the trade-offs
When to look elsewhere
- Anyone needing a batter head — this goes on the front
- Kits with 20, 22, or 26 in. kick drums
- Drummers who want a fully solid front head with no port
What matters in use
The specifications, translated
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 02
Pre-cut offset hole
Mic access and controlled air release without cutting your own port. Off-center placement keeps the head from losing too much tone.
Detail 03
24 in.
Fits a 24 in. diameter bass drum shell only. Depth of the drum does not change the head size.
Detail 04
Onyx finish
Dark surface, so a plain logo or graphic will not show the way it does on a white head.
Final check
Know before you order
- 01Batter head is not included; this is the front head only
- 02Check your kick is 24 in. across, measured on the shell
- 03Muffling pillow or ring is separate if you want a drier sound
Product questions
Before you decide
Straight answers to the questions shoppers most often ask about this product.
01Can I hit this head?
It is a resonant front head, not a batter. Use a batter head on the pedal side.
02Does it already have a mic hole?
Yes. It comes with an offset port cut, so you can get a mic inside without cutting it yourself.
03Will this fit a 22 in. bass drum?
No. Head size must match shell diameter. A 24 in. head only fits a 24 in. kick.
04Do I need to remove the hoop to install it?
Yes. Loosen and remove the claws and hoop, swap the head, then retension evenly with a drum key.
Reference
Full specifications
The complete catalog record, organized around the decisions musicians make when comparing gear.
1 detailsBody & build
- Body Shape
- Offset
