Detail 01
EQ3 damping ring
An internal ring near the rim cuts overtones, so the drum needs little or no muffling stuffed inside.

Independent shopping perspective
A 24-inch Evans EQ3 bass drum head with damping built into the head. For big kicks that boom more than they punch.


Strong match
Consider the trade-offs
What matters in use
Catalog numbers tell only part of the story. These are the details most likely to change how this product feels, sounds, or fits into a setup.
Detail 01
An internal ring near the rim cuts overtones, so the drum needs little or no muffling stuffed inside.
Detail 02
A textured white coating instead of bare film. Slightly warmer and less glassy, and it hides scuffs.
Detail 03
Measure the shell across the top. A 24 will not fit a 22-inch kick, hoop size is irrelevant.
Detail 04
A bass drum takes two heads, one per side. This covers a single side of the drum.
Detail 05
Bass heads cost more than tom heads simply because of size. Budget accordingly if you plan to replace both sides.
Final check
Product questions
Straight answers to the questions shoppers most often ask about this product.
No. Bass drum heads match the shell diameter exactly. A 24-inch head only fits a 24-inch kick. Measure the shell itself, not the wooden hoop.
Usually far less. Start with the drum empty, listen, then add a small pillow only if the low end is still washing out the attack.
No. A bass drum needs a head on each side. This is one of them, so check which side you are replacing before ordering.
A textured white coating applied to the film rather than leaving it clear. It warms the tone slightly and takes beater marks more gracefully than clear plastic.